NX1BL-32T-KT3B Datasheet, PDF (1/6 Pages) Hirose Electric – Simple Assembly Type PC Card Frame Kits

Simple Assembly Type PC Card Frame Kits
NX1 Series
Back connector
68-contact socket
sFeatures
1. Great reduction of the number of frame kit
assembly steps
Use of this simple assembly method has greatly reduced the
number of assembly steps. Processes such heat fusion and
cooling of the covers are no longer required. Assembly of the
frame kit is possible using simple jig tools. (See the Simple
Assembly Method insert to the right.).
2. Excellent Shielding Qualities
The covered construction using a metal panel out to the sides of
the card provide excellent shielding qualities. (See Figure 4.)
3. Board Offset
Available in types with board offsets of 0.3mm and 0.9mm.
4. Back connectors
Back Connectors available with 15,25, and 32 contacts.
5. Can Be Used With CardBus Types
6. Stable Conduction Maintained Between Panels
The spring quality of the metal ensures stable conduction to be
maintained between the panels at the panel lock portion.
7. Conduction Maintained Between Panel and Board
The cunduction between panel and board is maintained by
contact between the panel and a one-body ground spring.
sApplications
A wide variety of PC cards including LAN, FAX modem, and
SCSI.
Frame+Metal panel
Figure 1
Simple Assembly Method
Figure 2
Figure 3
Metal panel covers all the
way to the card sides
B2
Figure 4
(For details, see the frame Kit assembly procedure on page 6)