MS-180 Datasheet, PDF (1/8 Pages) Hirose Electric – Subminiature Coaxial Switch 0.85 mm High, DC to 11 GHz

Subminiature Coaxial Switch 0.85 mm High, DC to 11 GHz
MS-180 Series
■Overview
Developed for inspection of high frequency circuits
used in portable terminals.Verification of the circuit
performance is accomplished by simply inserting the
external plug in the board mounted receptacle.This
action re-directs the circuit from normal condition to
the plug side. Removing the plug restores circuit to
its normal condition.
The plug connector has been also downsized and
the diameter made slimmer than previous products,
to give the test tool layout a degree of freedom.
■Features
1. Low insertion loss
0.1 dB Max. up to 3.0 GHz (not mated with the plug).
0.2 dB Max. up to 6 GHz (not mated with the plug).
0.3 dB Max. up to 11 GHz (not mated with the plug).
2. Space-saving and low profile design
0.85mm high above the board.
1.8mm x 1.8mm occupied board space.
3. Performs over a wide frequency range
Applicable frequencies range over a wide band,
from DC to 11 GHz.
4. Miniaturization of the non-implementable
area and set aperture hole
The external diameter of the plug tip is as narrow as
Ø2.24mm, the non-implementable area and set
aperture hole can be minimized.
5. Automatic board placement
Packaged on tape-and-reel the receptacles can be
placed with vacuum nozzles of the automatic
placement equipment.
6. Beryllium Free, Halogen Free
Chlorine, and bromine are not used in the receptacles.
*Definition according to IEC 61249-2-21.
Br 900 ppm max., Cl 900 ppm max., and Br + Cl 1500
ppm max.
Space-saving design
Low profile -0.85mm protrusion above the board.
Small space-1.8mm x 1.8mm occupied board space.
Size comparison with the existing MS-156C
˔5PQ
WJFX



˔)FJHIU


TBWJOH
PG
TQBDF



MPXFS
QSPpMF
˔8FJHIU
H
H

MJHIUFS
XFJHIU
2014.10w
1