MS-151NB Datasheet, PDF (1/6 Pages) Hirose Electric – Interface RF Connector with Switch, built-in interlock, DC to 3GHz

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Interface RF Connector with Switch, built-in interlock, DC to 3GHz
MS-151NB Series
sOverview
Designed for end user applications requiring re-
direction of transmission from internal built-in
antenna to the external antenna. Small size,
lightweight and high reliability makes it ideal for
use in 2.4 GHz band wireless LAN applications.
Plug can be rotated after full insertion.
sFeatures
1. Confirmation of complete connection
Built-in interlock feature confirms fully mated
condition
with a "click" sensation.
2. Non-directional connection
The connector can be mated in any position on a
360° axis and can rotate within the same when in
use, allowing routing of the connected cable in
any direction.
3. High durability
Guaranteed 5000 insertion/removal cycles.
4. Space-saving
The external dimensions of the board-mounted
receptacle (5.0 mm high, 6.5 mm wide, 7.0 mm
deep) makes it ideal for use in small devices.
5. Board placement with automatic equipment
Packaged on tape-and-reel. Also available with a
vacuum pick-up cap over each switch.
6. RoHS compliant
All components and materials comply with the
requirements of the EU Directive 2002/95/EC.
sApplications
GPS terminals, wireless LAN modules, notebook
computers, PDA, and other high frequency
equipment.
(Page 7 lists applications and antenna circuit
switching examples.)
qReceptacle
qPlug
MS-151
MS-151-C(LP)
qSMA Conversion Adapter qSMA Conversion Adapter
For Receptacle: MS-151NB For Plug: MS-151-C(LP)
MS151P-HRMJ
MS151J-HRMJ
04/2010925