MR-201 Datasheet, PDF (1/1 Pages) Hirose Electric – Feed-through Non-reflecting Terminations

Feed-through Non-reflecting Terminations
MR Series
sFeatures
1.High Performance
These wide bandwidth/high matching non-reflective
terminators use Hirose Electric original high
frequency matching technology.
2.Feed-through Termination
These termination are intended for measurements
of 50ø products using a synchroscope.
MR-201
sProduct Specifications
Ratings
Frequency range
Characteristic impedance
Maximum Input Power
Resistance value
DC to 0.5 GHz
50 ohms
0.5 W
50±1 ohms
Operating temperature range
Operating relative humidity
-10ç to +65ç
95% Max.
Item
1.1 max.
1.V.S.W.R. (Reference) _{1.2 max.}
Standard
2.Vibration
3.Shock
No electrical discontinuity of 1 µs or more
No damage, cracks, or parts dislocation
4.Temperature cycle No damage, cracks, or parts dislocation
qThe test method conforms to MIL-STD-202.
Conditions
DC to 100 MHz
100 MHz to 500 MHz
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
acceleration of 98 m/s² for 2 hours in each of 3 directions
Acceleration of 490 m/s², sine half-wave waveform,
3 cycles in each of the 3 axis
Temperature: -55ç ¡ +5ç to +35ç ¡ +85ç ¡ +5ç to +35ç
Time: 30 ¡ 15 max. ¡ 30 ¡ 15 max. (Minutes)
200 cycles
sMaterials
Part
Connector Body
Insulator
Male contacts
Female contacts
Resistor
Material
Brass
PTFE
Brass
Beryllium copper
Metal film
Finish
Nickel plating
----------
Gold plating
Gold plating
----------
sExternal Dimensions
sTypical Data
(With output end open)
68