MCR60A-98D-2.54DS Datasheet, PDF (1/5 Pages) Hirose Electric – ISA Bus (AT bus)

ISA Bus (AT bus)
MCR60 Series
sFeatures
1. Standard
Compliant with ISA bus (AT bus) standard
2. Connector Type
The contact pitch is 2.54mm, and the connector has 98
contacts.
3. Board Mounting Type
Straight through hole, right angle through hole types
are available.
4. Prevents mis-insertion in the board
Using the polarizing key prevents mis-insertion in the
printed board.
sProduct Specifications
Rating
Current rating: 3A
Operating Temperature Range: -30 to +85ç (Note 1) ^{Storage Temperature Range: -10 to +60ç (Note 2)}
Voltage rating: 300V AC Operating Humidity Range: 40 to 80%
Storage Humidity Range: 40 to 70% (Note 2)
Item
Specification
1.Insulator Resistance 1000M ohms min.
2.Withstanding Voltage No flashover or insulation breakdown.
3.Contact Resistance 30m ohms max.
4.Vibration
No electrical discontinuity of 10µs or more
5.Humidity(Steady state) Insulation resistance : 1000M ohms min.
6.Temperature Cycle _{No damage, cracks, or parts looseness.}
Condition
500V DC
1000V AC/1 minute.
100mA
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
(-65ç : 30 minutes¡15 to 35ç: 5 minutes max.¡
125ç : 30 minutes¡15 to 35ç: 5 minutes max.) 5 cycles
7.Durability (Mating/un-mating) Contact resistance : 30m ohms max.
500 cycles
8.Resistance to Soldering heat _{No deformation of components affecting performance.} Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
sMaterial
Parts
Insulator
Contact
Material
PBT
Copper alloy
sOrdering Information
Finish
Black
Contact area Selective gold plated
Lead area Tin-lead plated
Remarks
UL94V-0
---------------
---------------
MCR60 A - 98 D - 2.54 DS
1
2
34
5
6
1 Series Name : MCR60
2 Mold Type
A: Without mounting hole
Blank: With Mounting hole
3 Number of contacts : 98
4 Contact alignment : D : Double side
5 Contact pitch : 2.54mm
6 Contact type
:
DS : Straight type
DSA : Right bent and right angle type
DSB : Left bent and right angle type
A22