LX60-16S Datasheet, PDF (1/6 Pages) Hirose Electric – Ultra Low-profile Interface Connectors with 2.0 mm Mounting Height

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
NEW ^{All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.}
Ultra Low-profile Interface Connectors with 2.0 mm Mounting Height
LX Series
■Overview
Hirose’s next generation of interface connectors
further reduces the mounting height of the
receptacle by approximately 30% (compared with
the 3200 Series receptacle).
High durability, secure mating, electrostatic
protection and ease of operation guarantees
reliable and consistent performance in demanding
consumer applications.
Lower Profile
■Features
1. Low profile on the PCB
When mounted on the PCB surface the receptacle height
is 2.0 mm.
2. Strong Construction
Use of metal shell and advanced plastics guarantees that
fully mated connectors will withstand 30 N max. force
applied on the plug in any direction.
3. High durability
5000 mating/un-mating cycles without any degradation of
electrical or mechanical performance.
Tactile sensation when mating confirms complete mated
condition and assures secure retention of the plug.
4. Sequenced contact mating
The protection of the circuit is assured by having the 2
contact at each end of the receptacle protrude forward by
0.5 mm, with electrical wipe of 1.45 mm. Location of the
circuit protection contacts can be changed as required.
Remaining contacts electrical wipe is 0.95 mm.
5. Incorrect Insertion Prevention
Connectors will not be damaged when angled or reverse
plug insertion is attempted.
6. Safety plug release
Plug will release when an excessive pull force is applied
to the cable.
7. RoHS Compliant
All components and materials comply with the
requirements of the EU Directive 2002/95/EC.
Existing 3200 Series
LX Series
Strong Construction
30N
30N
Incorrect insertion prevention
Angled insertion
Reversed insertion
2008.5w
1