ID1A-6S-2.54SF Datasheet, PDF (1/7 Pages) Hirose Electric – SIM Card Sockets

SIM Card Sockets
ID1A Series
Miniature and Thin
Plecement surface
30.6
2.45
Photograph (1)
sFeatures
1. Suited for Plug-in SIM Cards of the GSM Standard (11.11)
In Europe, SIM card Subscriber Identity Modules are used
for subscriber identification with portable telephone terminals
of the GSM system for which standards have been unified.
The ID1A Series of sockets are suited for use with GSM
standard (11.11) plug-in SIM cards.
2. Miniature and Thin
These sockets are miniature and thin with a height of 2.45
mm, length of 30.6 mm, and width of 17.4 mm. The weight
has been reduced by 30% compared with our existing
products. (See Photograph (1).)
3. Suited to Automatic Mounting
The board mounting method is of the surface mount
type.In addition to the standard tray packaging
specification, an embossed tape specification suited to
automatic mounting is also available.
4. Prevention of Incorrect Insertion to the Board
A board-positioning boss prevents incorrect insertion to the
board by means of boss position and boss diameter.
5. Slide Lock System
An original lock structure securely holds the SIM card and easy
opening and closing of the card holder is another feature.
(See Photograph (2).)
sApplications
Portable terminals and equipment that use GSM Standard
(11.11) plug-in SIM cards.
Slide Lock System
LOCK
OPEN
Can be locked by
moving the slider.
Upside down insertion
of the SIM card is
prevented through
the establishment
of a polarity.
Photograph (2)
Structure and Names of the Parts
Slider
Card holder
Housing
Contacts
Photograph (3)
C39