IC1K-68RD-1.27SF Datasheet, PDF (1/4 Pages) Hirose Electric – PC Card Socket Connector Complies with PC card Standard

PC Card Socket Connector Complies with PC card Standard
IC1 Series
sProduct Specifications
sFeatures
1. Compliant with PC Card Standards
Polarized entry prevents wrong insertion into a
corresponding connector. And sequential
contact engagement prevents electorostatic
discharge,avoiding possible damage to sensitive
board circuits.
2. Suited to Automatic Mounting
Packaged for a board placement with aoutmated
equipment.
3. Lead Offset
Available with several board termination
levels,to allow use of different height board
components.
In relation to the center line of connector,-
0.2mm,+0.3mm,+0.55mm,+0.9mm and
terminations on board center are available.
Ratings
Current rating 0.5 A
Operating temperature
Operating humidity
Voltage rating 125 V AC
-55ç to +85ç (Note 1)
95% R.H. max.
(No condensation)
Storage temperature -40ç to +70ç (Note 2)
Storage humidity
40% to 70% (Note 2)
Item
1. Insulation resistance
2. Withstanding voltage
3. Contact resistance
4. Vibration
Specification
1000M ohms min.
No flashover or insulation breakdown.
40 m ohms max. (initial value) (Note 3)
No electrical discontinuity of 100ns or
more
500 V DC
500 V AC / 1 minute
1 mA
Conditions
Frequency: 10 to 2000 Hz, single amplitude of 1.52 mm or
acceleration of 147 m/s²(peak), 4 hours in each of the 3 directions.
5. Humidity (Steady state) Insulation resistance: 100 M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95%
6. Temperature cycle
No damage, cracks, or parts looseness.
-55ç, 30 min /15 to 30ç, within 5 min/85ç, 30 min
/15 to 35ç, within 5 min, for 5 cycles
7. Durability
(Insertion/withdrawal)
8. Resistance to
soldering heat
Change of contact resistance from the
start should be 20 m ohms max.
No deformation of components
affecting performance.
10000 cycles at 400 to 600 cycles per hour
Reflow: At the recommended temperature profile
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature
Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during
transportation.
sMaterials
Part
Insulator
Contact
Material
PPS
IC1K,IC1HA:Phosphor bronze
Others:Beryllium copper
Finish
Color : Black
Contact Area : gold plating
Lead Area : solder plating
Remarks
UL94V-0
-----------------
A52