HIF3BA-6D-2.54R Datasheet, PDF (1/27 Pages) Hirose Electric – Ribbon Cable connector Compliant with MIL Standard

Ribbon Cable connector Compliant with MIL Standard
HIF3B Series
sFeatures
1. Product Compliant with MIL Standard
HIF3B series has been developed as a product compliant with MIL
standard, and used for wide applications.
2. UL Approval Product
HIF3B series connectors are UL approved.
3. Mechanism to Prevent Mis-insertion
This connector is equipped with the mechanism to prevent Mis-
insertion as follows.
1 The system provides the convex area to insert the guide-key on the
pin header side, and to guide it in combination with the socket
convex area (MIL standard).
2 The system embeds and guides the polarizing key in the socket holes.
4. Applicable Cable AWG#28
The applicable cable is UL2651 AWG#28 flat cable (7 cores./
0.127mm, jacket dia. 0.9±0.1mm).
sProduct Specifications
Rating
Current rating : 1A
Operating Temperature Range : –55 to +85ç (Note 1) Storage Temperature Range : –10 to +60ç (Note 2)
Voltage rating : 200V AC Operating Moisture Range : 40 to 80%
Storage Humidity Range : 40 to 70% (Note 2)
Item
Specification
1. Insulation Resistance 1000M ohms min.
2. Withstanding voltage No flashover or insulation breakdown.
3. Contact Resistance 15m ohms max.
4. Vibration
No electrical discontinuity of 1µs or more
5. Humidity (Steady state) Insulation resistance: 1000M ohms min.
6. Temperature Cycle No damage, cracks, or parts looseness.
7. Durability (Mating/un-mating) Contact resistance: 15m ohms max.
8. Resistance to Soldering heat No deformation of components affecting performance.
Condition
500V DC
650V AC/1 minute
0.1A
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
(-65ç: 30 minutes ➝ 15 to 35ç: 5 minutes max.
125ç: 30 minutes ➝ 15 to 35ç: 5 minutes max.) 5 cycles
500 cycles
Flow: 260ç for 10 seconds
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
sMaterial
Part
Insulator
D
Socket Contact
DA
Pin header contact
Material
PBT
Beryllium copper
Copper alloy
Brass
Finish
Black
Connection area
Gold plated
Connection area
Gold plated
Connection area
Gold plated
Connection area
Tin lead plated
Selective Gold plated
Remarks
UL94V-0
–––––––
–––––––
B15