HIF2E-10D-2.54RB Datasheet, PDF (1/4 Pages) Hirose Electric – 2.54mm Connector Directly Mounted on Board

2.54mm Connector Directly Mounted on Board
HIF2E Series
sFeatures
1. Directly Mounted on Board
This connector can be directly mounted on the board using the
1.27mm pitch flat cable.
2. Variation in Number of Contacts
10, 14, 16, 20, 26, 30, 34, 40, 50, and 60 contacts, are available
3. Applicable Cable
The applicable cable is UL2651 AWG#28 flat cable
(7 cores/0.127mm, jacket dia. :0.8 to 1.0mm).
sApplications
Computers, terminal equipment, PPC, various kinds of electronic equipment, office automation machines, etc.
sProduct Specifications
Rating
Current rating : 1A
Operating Temperature Range : –55 to +85ç (Note 1) Storage Temperature Range : –10 to +60ç (Note 2)
Voltage rating : 200V AC Operating Moisture Range : 40 to 80%
Storage Humidity Range : 40 to 70% (Note 2)
Item
Specification
Condition
1. Insulation Resistance 1000M ohms min
500V DC
2. Withstanding voltage No flashover or insulation breakdown.
650V AC/1 minute
3. Contact Resistance 15m ohms max
0.1A
4. Vibration
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5. Humidity (Steady state) Insulation resistance: 1000M ohms min.
96 hours at temperature of 40ç and humidity of 90% to 95%
6. Temperature Cycle No damage, cracks, or parts looseness.
(-65ç: 30 minutes ➝ 15 to 35ç: 5 minutes max.
125ç: 30 minutes ➝ 15 to 35ç: 5 minutes max.) 5 cycles
Flow: 260ç for 10 seconds
7. Resistance to Soldering heat No deformation of components affecting performance.
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
sMaterial
Part
Insulator
Material
PBT
Contact
Copper alloy
sOrdering Information
Black
Gray
Mount area
Connection area
Finish
HIF2E-*D-2.54R(S) B
HIF2E-*D-2.54R(S) A
Gold plated
Tin plated
Remarks
UL94V-0
––––––
HIF 2E - * D - 2.54 R(S)B
q
we
r
t
q Series Name
: HIF 2E
t Connection method and contact plating type
w Number of Contacts : 10, 14, 16, 20, 26, 30, 34, 40, 50, and 60
RB : Universal type circuit plated with gold
e Contact alignment : D : Double
RSB : Universal type circuit plated with tin
r Contact Pitch
: 2.54mm
RA : Hirose original circuit plated with gold
RSA : Hirose original circuit plated with tin
B9