HIF2C-10DT-1.27R Datasheet, PDF (1/4 Pages) Hirose Electric – Staggered Connector Directly Mounted on Board

Staggered Connector Directly Mounted on Board
HIF2C Series
s Features
1. Directly Mounted on Board
This connector can be directly mounted on the board
using 1.27mm pitch flat cable.
2. Variation in Number of Contacts
The number of contacts contains 10, 16, 20, 26, 30, 34,
40, 50, and 60 contacts.
3. Low Profile Type
The connector height is lower than that of the HIF2E series.
4. Applicable Cable
The applicable cable is UL2651 AWG#28 flat cable (7
s Applications
cores./0.127mm, jacket dia. :0.8 to 1.0mm).
Computers, terminal equipment, PPC, various kinds of electronic equipment, business machines, etc.
s Product Specifications
Rating
Current rating: 1A
Voltage rating: 200V AC
Operating Temperature Range:–55 to +85ç (Note 1) Storage Temperature Range:–10 to +60ç(Note 2)
Operating Moisture Range:40 to 80% Storage Humidity Range:40 to 70% (Note 2)
Item
Specification
1. Insulation Resistance 1000M ohms min.
2. Withstanding voltage No flashover or insulation breakdown.
3. Contact Resistance 15m ohms max.
4. Vibration
No electrical discontinuity of 1µs or more
5. Humidity (Steady state) Insulation resistance: 1000M ohms min.
Condition
500V DC
650V AC/1 minute
0.1A
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
6. Temperature Cycle _{No damage, cracks, or parts looseness.}
(–65ç: 30 minutes ➝15 to 35ç: 5 minutes max.
125ç: 30 minutes ➝15 to 35ç: 5 minutes max.) 5 cycles
7. Resistance to
Soldering heat
Flow: 260ç for 10 seconds
No deformation of components affecting performance.
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature
Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during
transportation.
s Material
Part
Insulator
Contact
Material
PBT
Beryllium copper
s Ordering Information
Finish
Black
Contact area
Gold plated
Connection area
Tin plated
Remarks
UL94V-0
---------------
HIF2C - * DT - 1.27 R (S)
1
2
3
4
56
1 Series Name: HIF 2C
2 Number of contacts: 10, 16, 20, 26, 30, 34, 40, 50, and 60
3 Contact alignment: DT : staggered
4 Contact Pitch: 1.27mm
5 Connection type : R : ribbon cable
6 S : Tin plating
B61