HD-02103AST Datasheet, PDF (1/3 Pages) Hirose Electric – Stick Coupler

Stick Coupler
HD-02103AST Series
sFeatures
1.High Performance
Low insertion loss: 0.1 dB max. (Typical)
2.High Power Handling
200 W max. power handling capability. Efficient
heat dissipation characteristic.
3.Extremely Small Size and Lightweight
Innovative Hirose Electric design of the case and
cover is behind the extremely small size and
lightweight.
4.Simple installation
Standard screw mounting and solder tabs allows
direct mounting to planar circuits.
sSpecifications
Ratings
Frequency range
Characteristic impedance
Maximum Input Power
1800 ~ 2200 MHz
50 ohms
200 W
Operating temperate range
Operating relative humidity
Note: The frequency range and the maximum input power will differ depending on the products.
0ç to +80ç
95% Max.
Characteristic
Requirement
1.Insulation resistance 1000M ohms Min.
2.Vibration
3.Shock
No electrical discontinuity of 1 µs or more
No damage, cracks, or parts dislocation
4.Temperature cycle
No damage, cracks, or parts dislocation
5.High temperature exposure
6.Low temperature exposure
7.Corrosion resistance No serious corrosion
Conditions
DC 250V
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
acceleration of 98 m/s² for 2 hours in each of 3 directions
Acceleration of 490 m/s², sine half-wave waveform,
3 cycles in each of the 3 axis
Temperature: -55ç¡+5ç to +35ç¡+85ç¡+5ç to +35ç
Time: 30¡5 max.¡30¡5 max. (Minutes)100 cycles
96 hours at 85ç
96 hours at -55ç
Exposed to 20% salt water solution for 48 hours
8.Sulfur dioxide gas No damage, cracks, or parts dislocation
96 hours in 10 ppm concentration
qThe test methods conform to MIL-STD-202.
sMaterial
Component
Cover
Case
Board
Tabs
Material
Aluminum
Brass
Dielectric
Phosphor bronze
Finish
---------
Nickel Plated
Gold plated
Gold plated
24