H-MS3057-12A73 Datasheet, PDF (1/24 Pages) Hirose Electric – MS type Lower Profile Plug

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
NEW ^{All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.}
MS type Lower Profile Plug
H/MS Series
Circular connector conforming to MIL-C-5015
PAT.P
Connector Height Comparison
50.1mm
18-10 Size
45.5mm
Existing MS Connector
Lower-profile Plug
sFeatures
1. 20% Height Reduction
When compared with existing H/MS Series connectors
the overall height of plug assemblies is lower, allowing it
to be used in space constrained applications.
2. Cable Exit in 360° Directions
The cable can exit in any of the 8 fixed direction, in 45°
increments.
3. Simple Assembly
The 2-piece design consisting of the contact/insulator
assembly and the back-shell assembly allows termination
without the use of any specialized tools.
4. Water and Dust Protection
IP 67 rating when fully terminated and mated with
corresponding part.
5. TUV Certification
Provided with a protective circuit function for TUV
certification. The (D) pin is directly connected to the
outside metal case.
sApplications
Factory automation equipment, robotic equipment, servo
motors, and a wide variety of industrial and measuring
instruments.
48.2mm
22-22 Size
53.2mm
Existing MS Connector
Lower-profile Plug
Cable Exit Direction of 360°
Plug
(45°) Can be changed
in 45 degree increments
2004.6
1