DF61 Datasheet, PDF (1/8 Pages) Hirose Electric – Board-to-Wire Swing-Lock Connector for Low-Profile Power Source

Board-to-Wire Swing-Lock Connector for Low-Profile Power Source
DF61 Series
Swing-Lock Structure Illustration
4PDLFU
)FBEFS
MPDL
1SPUSVTJPO
3FDFTT
■Features
1.Reinforced Swing Lock Structure
Our unique swing-lock structure cradles the wire side plug
and resists the plug from becoming disengaged due to
handling strain or loads.
2.Header Lock Improves Plug Retention
During mating, the header lock engages with the plug
assembly. The lock is reinforced with metal which adds
strength to the lock and increases the retention between the
header and the plug.
3.Compact Size- High Voltage
The compact 2.2 mm pitch connector has a voltage rating of
350V due to the long creep distance.
4.Solder Wicking Prevention
Header is molded in one piece. This ensures a tight fit
between the contact and the header and prevents solder
wicking.
5.High Current of MAX 5 Amps (AWG22)
A highly conductive material is used for the contacts. The
material provides for a high current flow by reducing the
contact resistance.
)FBEFS
The protrusion on the bottom side of the socket fits into a
corresponding recess on the header. This aligns the socket into
the correct mating position.
Before Mating
After Mating
)FBEFS
-PDL
.FUBM
3FJOGPSDFE
XJUI
.FUBM
The metal fitting is partly molded
in the header’s housing lock.
5IF
)FBEFS
QVTIFT
EPXO
UIF
QSPUSVTJPO
PG
UIF
TPDLFU
BOE
MPDLT
JU
JO
QMBDF
Tensile strength of the cable:
10N or greater
Maximum Creep Distance
Isolated Male Contacts
2.2mm
■Applications
Digital cameras, digital video cameras, LED lights, laptop
computers, tablet computers, portable devices, power
supply equipment, etc.
An integrated wall
between the contacts
maximizes the creepage
distance for higher voltage
capabilities.
2013.4 ②
1