DF58 Datasheet, PDF (1/8 Pages) Hirose Electric – Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply

NEW
Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply
DF58 Series
Small-sized, low profile connector
4.97mm
5.8mm_{Ê¢3 pos.Ê£}
1mm
Fig.1
˙Features
1. Small-sized, low profile connector
Low profile design of 1.0mm stacking height, the
connector is suitable for small-sized devices.
2. Leveling of the vertical mating cable
Ver tical inser tion of the connector for mating
enhances the assembly operation within device.
3. Proprietary ViSe Lock design
The cable side lock has been strengthened with our
proprietary ViSe Lock mechanism*, preventing the
cables from being easily disconnected due to tough
routing or an excessive load. (*ViSe Lock: Vertical-
insertion Swing-extraction)(Fig.2)*Patent pending
4. High current capability up the maximum
of 3.0A (2pos. : When 28AWG is used)
By adopting high conductivity material and lowering
contact resistance through optimized contact force,
high-current capability is achieved in spite of its
small size.
5. Highly reliable contact design
Effective mating length of 0.29mm is achieved in
spite of low profile 1.0mm stacking height. The
2-point clipping contact stabilizes contact resistance.
6. Halogen-free^*
*As defined by IEC 61249-2-21
Br-900ppm max, Cl-900ppm max, Br+Cl-1,500ppm max
Description of the ViSe Lock Design
Insertion operation appears to be vertical mating.
However, it is actually inserted at an angle which
ensures high retention force in upper direction.
Before mating
After mating
Contact design
Effective mating
length of 0.29mm
Fig.2
2-points of contact
Cross sectional view of contact face
Fig.3
2016.11
1