DF52 Datasheet, PDF (1/6 Pages) Hirose Electric – 0.8mm Pitch, Compact and Robust Wire-to-Board Connectors

0.8mm Pitch, Compact and Robust Wire-to-Board Connectors
DF52 Series
˗Small and robust structure
Board side
Cable side
Thick wall parts
Thick wall parts
Housing walls are thick while the connector remains small.
■Features
1. Small-sized connector
0.8mm Pitch, 1.75mm Height, 4.1mm Depth. Suitable for
small-sized applications.
2. Small but robust structure
The housing is designed with thick walls while remaining
small. This produces a strong, robust connector that
resists damage.
3. Suitable for high current applications.
The maximum current of 2.5A (using 2-pos 28 AWG wire)
is achieved by using highly conductive material and
appropriate contact force.
4. BOX shaped contact prevents deformation.
The BOX shaped crimp contact prevents deformation
during assembly and contributes to the overall stability
and robustness.
5. Visual check insures fully mated Plug and Receptacle
The housing is designed with an open side that allows for
visual inspection to insure the connectors are fully mated
preventing accidental disconnect.
6. Glow Wire compliance (Compliant with IEC 60695-2-11)
7. Halogen-free
Chlorine and bromine levels are below standard values of
IEC 61249-2-21.
Br : less than 900ppm, Cl : less than 900ppm,
Br + Cl : less than 1,500ppm.
Robust structure prevents damage while routing wiring.
Fig.1
˗Box shaped contact structure
The Box shaped structure of the crimp contact prevents deformation.
Fig.2
˗Allows for visual inspection of the mating process.
Incomplete mating
Mating complete
Exposed contact
The contact is exposed in the Mating is complete when the
half-mated state.
contact is no longer visible.
The mated condition can be visually checked.
Fig.3
2016.5