DF13-2630SCF Datasheet, PDF (1/1 Pages) Hirose Electric – Crimping Contact

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
sCrimping Contact
Part Number
DF13-2630SCF
DF13-2630SCFA
CL No.
536-0300-5
536-0298-5
Packaging Type
Reel
Reel
Quantity
10,000
10,000
Finish
Tin plating
Gold plating
qApplicable Cable (Tin Plating Annealed Copper Wire)
Conductor Size (Wire construction)
Jacket Diameter
AWG26(7 cores./0.16mm)
AWG28(7 cores./0.127mm)
Ø0.65 to Ø1.0mm
AWG30(7 cores./0.1mm)
Note:If other cables are used instead of the applicable cable, please contact the Hirose
sales department.
qRecommended Cable
UL1571
qStrip Length
1.2 to 1.9mm
BApplicable Crimping Tool
Type
Part Number
CL No.
Applicable Contact
Applicator
AP105-DF13-2630S 901-4531-9
DF13-2630SCF/SCFA
Press Main Unit
CM-105
901-0005-4
---------------
Manual Crimping Tool DF13-TB2630HC
550-0256-1
DF13-2630SCF
Extraction Tool
DF-C-PO(B)
550-0179-2
DF13-2630SCF
Note 1.If a trouble has occurred due to other tools, which are not designated by Hirose,
Hirose won't guarantee any product.
Note 2.The manual crimping tool is used to sequentially cut the reel contact with carrier.
BApplication Pattern
SMT
(Single Row Product)
Through hole
(Single Row Product)
SMT
(Double Row Product)
B191