CR6-06S-3.96E Datasheet, PDF (1/4 Pages) Hirose Electric – 3.96mm Pitch Card Edge Connector

3.96mm Pitch Card Edge Connector
CR6 Series
Connection Method
Eyelet
Open End
Through hole
sFeatures
1. Contact Type
Uses the tuning fork contact,
where the contact pitch
is 3.96mm.
2. Variation in number of contacts
6, 10, 12, 15, 18, 22, 28, 36 contacts are available.
3. Connection Type
Eyelet, open end and through hole types are available.
4. Prevents mis-insertion in the board
Using the polarizing key prevents mis-insertion in the printed
board.
sProduct Specifications
Rating
Current rating: 5A
Operating Temperature Range: -30 to +85ç (Note 1) Storage Temperature Range: -10 to +60ç (Note 2)
Voltage rating: 600V AC Operating Humidity Range: 40 to 80%
Storage Humidity Range: 40 to 70 (Note 2)
Item
Specification
1.Insulation Resistance 5000M ohms min.
2.Withstanding Voltage No flashover or insulation breakdown.
3.Contact Resistance 6m ohms max.
4.Vibration
No electrical discontinuity of 10µs or more
5.Humidity(Steady state) Insulation resistance: 1000M ohms min.
6.Temperature Cycle _{No damage, cracks, or parts looseness.}
Condition
500V DC
1800V AC/1 minute.
1A
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
(-65ç : 30 minutes¡15 to 35ç: 5 minutes max.¡
125ç : 30 minutes¡15 to 35ç: 5 minutes max.) 5 cycles
7.Durability (Mating/un-mating) Contact resistance: 6m ohms max.
500 cycles
8.Resistance to Soldering heat _{No deformation of components affecting performance.} Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
A13