CR23-6SA-4DS Datasheet, PDF (1/5 Pages) Hirose Electric – 4mm Pitch Single Side Card Edge Connector

4mm Pitch Single Side Card Edge Connector
CR23 Series
sFeatures
1. 4mm pitch contact
2. Variation in number of contacts
6, 10, 14, 18, 20, and 22 contacts are available.
3. Connection method
Eyelet and through hole types are available.
4. Prevents mis-insertion in the board
Using the polarizing key prevents mis-insertion in
the board.
sProduct Specifications
Rating
Current rating: 3A
Operating Temperature Range : -30ç to +85ç (Note 1) Storage Temperature Range : -10 to +60ç (Note 2)
Voltage rating: 600V AC Operating Humidity Range : 40% to 80%
Storage Humidity Range : 40 to 70% (Note 2)
Item
Specification
1.Insulation Resistance 5000M ohms
2.Withstanding Voltage No flashover or insulation breakdown.
3.Contact Resistance 15m ohms max.
4.Vibration
No electrical discontinuity of 10µs or more
5.Humidity (Steady state) Insulation resistance: 5000M min.
6.Temperature Cycle _{No damage, cracks, or parts looseness.}
Condition
500V DC
1800V AC/1 minute
1A
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
(-55ç : 30 minutes¡15 to 35ç: 5 minutes max.¡
85ç : 30 minutes¡15 to 35ç: 5 minutes max.) 5 cycles
7.Durability (Mating/un-mating) Contact resistance: 30m ohms max.
500 cycles
8.Resistance to Soldering heat _{No deformation of components affecting performance.} Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
sMaterial
Parts
Insulator
Contact
Material
Polycarbonate
Copper alloy
sOrdering information
Finish
Blue
Tin plated or gold plated
Remarks
UL94V-0
________
CR23
q
A – 6 S A – 4 DS
w
er t
yu
q Series Name : CR23
w Mold Type
: A: Without mounting hole
Blank: With Mounting hole
e Number of contacts: 6, 10, 14, 18, 22
r Contact alignment : Single side
t A: Gold plating
B: Tin plating
y Contact pitch: 4mm
u Contact type
DS: Through hole type
E : Eyelet type
A2