599R2GBC-CA Datasheet, PDF (7/8 Pages) HB Electronic Components – 5.0 mm DIA LED LAMP

5.0 mm DIA LED LAMP
599R2GBC-CA
yLEAD STRENGTH
1) Bend strength
Do not bend the lead more than twice. (Fig.9)
REV:A / 0
Fig.9
2) Tensile strength (@Room Temperature)
If the force is 1kg or less, there will be no problem. (Fig.10)
OK！
1Kg
Fig.10
yHANDLING PRECAUTIONS
Although rigid against vibration, the LEDs may damaged or scratched if dropped. So take care
when handling.
yCHEMICAL RESISTANCE
1) Avoid exposure to chemicals as it may attack the LED surface and cause discoloration.
2) When washing is required, refer to the following table for the proper chemical to be sued.
(Immersion time: within 3 minutes at room temperature.)
SOLVENT
ADAPTABILITY
Freon TE
⊙
Chlorothene
╳
Isopropyl Alcohol
⊙
Thinner
╳
Acetone
╳
Trichloroethylene
╳
⊙--Usable ╳--Do not use.
NOTE: Influences of ultrasonic cleaning of
the LED resin body differ depending
on such factors as the oscillator
output, size of the PC board and the
way in which the LED is mounted.
Therefore, ultrasonic cleaning should only be
performed after confirming there is no problem by
DRAWING NO. : DS-35-04-0637
DATE : 2005-10-19
Page : 7