RGB-CONTROLLER-101 Datasheet, PDF (4/5 Pages) HB Electronic Components – Damage caused by misuse

Hebei I.T. (Shanghai) Co., Ltd. _{LED SPECIFICATION}
Part No./型号：_{RGB-Controller-101}
(2).Descriptions for panel and remote controller keys.
Symbol
Name
Function
OFF/ON
On/off: turn on or off the LED controller
BRT+/BRT-
:increase/decrease brightness，totally 16-level
brightness， press and hold can change brightness
continuously
static red
Static green
Static blue
Static white
static orange
Static light green
Static deep blue 7 colors jump change
static deep yellow
Static cyan
Static pink
White gradual change
static yellow
Static light blue
Static light yellow
Static sky blue
Static purple
7 colors gradual
change
Static magenta
Three primary colors
jump change
5. Failure analysis and solutions
Failure
Analysis
1. No power.
2. Reversed the polarity.
No light
3. Wrong connection or poor
contact.
4. LED light has been bad.
1. Input wire is too long to cause
Brightness
of LED is not
consistent
wire loss.
2. Diameter of wire is too thin to
cause wire loss.
3. Power overload.
4. Controller overload.
Solutions
1. Check the power
2. Make sure the polarity is right.
3. Re-check the wire connection.
1. Shorten wire or use loop circuit.
2. Calculate the current, and then
replace thick wire.
3. Replace larger power.
4.Add a power amplifier
Tips: The effective power is generally only 80% of the marked power, so it is recommended in selecting
the power supply, the user choose a slightly larger one than the LED load power, at least for more than
20%!
www.ledz.com
4/5