E12LG2C Datasheet, PDF (4/4 Pages) HB Electronic Components – Highest Flux Green

Hebei I.T. (Shanghai) Co., Lt d. _{LED SPECIFICATION}
Part No.： E12LG2C
Precautions For Use
„ Storage
LEDs should be stored at temperatures less than 30℃ and humidity less than 50%.
LEDs should be used within 168 hours (7 days) after the package is opened.
„ Special thermal designs are recommended to take in outer heat sink design, such as
FR4PCB on Aluminum with thermal vias or FPC on Aluminum with thermal conductive
adhesive, etc.
„ Sufficient thermal management must be conducted, or the die junction temperature will be
over the limit under large electronic driving and LED lifetime will decrease critically.
„ Proper Handling
When handling the product, do not apply direct pressure on the silicone rubber.Do not touch
the silicone rubber with tweezers to avoid scratching or other damage.
Note
1． Flux is measured with an accuracy of ±15%
2． CCT is measured with an accuracy of ± 200K
3． Dominant Wavelength is measured with an accuracy of ± 1.5nm
4． Forward Voltage is measured with an accuracy of ± 0.15V
www.ledz.com
4/4