RGB-CONTROLLER-303 Datasheet, PDF (2/3 Pages) HB Electronic Components – Input Voltage range

Hebei I.T. (Shanghai) Co., Ltd.
LED SPECIFICATION
Button “ON/OFF”: Turn on/off the controller.
Button “PAUSE”: Keep current status, press it again, will continue to change.
Button “MODE+/M+”: Enter the next mode.
Button “MODE -/M -”: Return to the previous mode.
Button “SPEED/S”: Speed up/down color changing. (1～8 levels)
Button “BRIGHT/B”: Adjust led brightness levels. (1～8 levels)
Button “RESET”: Restore to default status if press this button over 3 seconds.
3. Pattern table
No.
st atus
1 static red
2 static green
3 static blue
4 static yellow
5 static purple
6 static cyan
7 static white
8 3color jumpy changes
9 7color jumpy changes
10 red stroboscopic
11 green stroboscopic
12 blue stroboscopic
13 yellow stroboscopic
14 purple stroboscopic
15 cyan stroboscopic
No .
status
16 white stroboscopic
17 3color gradual changes
18 7color gradual changes
19 red,green gradual changes
20 green,blue gradual changes
21 red,blue gradual changes
22 red gradual bright&fade
23 green gradual bright&fade
24 blue gradual bright&fade
25 yellow gradual bright&fade
26 purple gradual bright&fade
27 cyan gradual bright&fade
28 white gradual bright&fade
29 mode cycle
brt,speed(Dynamic) is valid
4. Safety Information
1. Please don’t install this controller in
lightening, intense magnetic, humid and
high-voltage fields.
To reduce the risk of component damage
and fire caused by short circuit, make sure
correct connection and no
2. short circuit before power on.
3. Check if the voltage and power adapter suit the controller and if anode or cathode definition is the
same as the controller’s.
4. If device has been damaged during transport, don’t take any action without contacting your supplier. If
being used properly in accordance with the instruction, and quality problems occur, please contact
local supplier too, we provide free repair or replacement services.
5. Conjunction Sketch Map
Before installation and use, we strongly
recommend you to read through this manual
carefully. For update information, please consult
with your supplier.
www.ledz.com
2/3