RF-5832H-PA101 Datasheet, PDF (1/2 Pages) Harris Corporation – 125 WATT HF POWER AMPLIFIER

®
RF-5832H-PA101
125 WATT HF
POWER AMPLIFIER
assuredcommunications^™
guarantees continuous
high performance and
reliability in the most
severe environments
The Harris 125-Watt Power Amplifiers increase the output of the
FALCON^® II RF-5800H-MP and the AN/PRC-150(C) transceivers to
125 watts PEP/Average.
The RF-5832H Power Amplifier operates in applications where
medium-power, medium-range communications are required.
Typical applications include mobile, boat, or base station
installations for general purpose HF-SSB voice and
data communications.
Continuous coverage is provided over the 1.6 to 30 MHz
frequency range. The power amplifier section is a broadband
design requiring no tuning or adjustment.
When used with the RF-5382H or the RF-382A Series Antenna
Couplers, the output of the power amplifier is automatically
matched to the specified antenna and requires no special
operator procedures.
Built-in self-test features permit operators or maintenance
personnel to fully check the transceiver and associated power
amplifier performance down to the module level. Fault
conditions are indicated on the transceiver’s front-panel display.
Power output is adjustable via the transceiver front panel or
remote control.