HMF4M32B8VN Datasheet, PDF (1/13 Pages) Hanbit Electronics Co.,Ltd – FLASH-ROM MODULE 16MByte (4M x 32Bit), 144-Pin SODIMM, 3.3V

HANBit
HMF4M32B8VN
FLASH-ROM MODULE 16MByte (4M x 32Bit), 144-Pin SODIMM,
3.3V
Part No. HMF4M32B8VN
GENERAL DESCRIPTION
The HMF4M32B8VN is a high-speed flash read only memory (FROM) module containing 8,388,608 words organized in a
x32bit configuration. The module consists of eight 2M x 8bit FROM mounted on a 144-pin, double-sided, FR4-printed circuit
board. Commands are written to the command register using standard microprocessor write timings.
Register contents serve as input to an internal state-machine, which controls the erase and programming circuitry. Write
cycles also internally latch addresses and data needed for the programming and erase operations. Reading data out of the
device is similar to reading from 12.0V flash or EPROM devices.
Eight chip enable inputs, (/CS0, /CS1, /CS2, /CS3, /CS4, /CS5, /CS6, CS7) are used to enable the module’s 4 bytes
independently. Outputs enable (/OE) and write enable (/WE) can set the memory input and output.When FROM module is
disable condition the module is becoming power standby mode, system designer can get low -power design. All module
components may be powered from a single +3.3V DC power supply and all inputs and outputs are TTL -compatible.
FEATURES
w Part Identifications
HMF4M32B8VN : 16Mbyte, 144-pin SODIMM, Gold
wAccess time : 70, 90 and 120ns
w High-density 16MByte design
w High-reliability, low-power design
w Single + 3V ± 0.5V power supply
w Easy memory expansion
w All inputs and outputs are TTL-compatible
w FR4-PCB design
w Low profile 144-pin SODIMM
w Minimum 1,000,000 write/erase cycle
w Sectors erase architecture
w Sector group protection
w Temporary sector group unprotection
w The used device is 2Mx8bit 48Pin TSOP
OPTIONS
w Timing
70ns access
90ns access
120ns access
w Packages
144-pin SODIMM
MARKING
-70
-90
-120
B
URL:www.hbe.co.kr
1
REV.02(August,2002)
HANBit Electronics Co., Ltd.