HMF1M64F4VS Datasheet, PDF (1/13 Pages) Hanbit Electronics Co.,Ltd – FLASH-ROM MODULE 8MByte (1M x 64-Bit) ,120PIN SMM,3.3V

HANBit
HMF1M64F4VS
FLASH-ROM MODULE 8MByte (1M x 64-Bit) ,120PIN SMM,3.3V
Part No. HMF1M64F4VS
GENERAL DESCRIPTION
The HMF1M64F4VS is a high-speed flash read only memory (FROM) module containing 262,144 words organized in an
x64bit configuration. The module consists of four 1M x 16 FROM mounted on a 120-pin, SMM connector FR4-printed circuit
board.
Commands are written to the command register using standard microprocessor write timings.
Register contents serve as input to an internal state-machine, which controls the erase and programming circuitry. Write
cycles also internally latch addresses and data needed for the programming and erase operations. Reading data out of the
device is similar to reading from 12.0V flash or EPROM devices.
Output enable (/OE) and write enable (/WE) can set the memory input and output. The host system can detect a program or
erase operation is complete by observing the Ready Pin, or reading the DQ7(Data # Polling) and DQ6(Toggle) status bits.
When FROM module is disable condition the module is becoming power standby m
ode, system designer can get low-power design. All module components may be powered from a single + 3.0V DC power
supply and all inputs and outputs are LVTTL-compatible
FEATURES
w Access time : 90, 100, 120ns
w High-density 8MByte design
w High-reliability, low-power design
w Single + 3V ± 0.3V power supply
w Easy memory expansion
w Hardware reset pin(RESET#)
w FR4-PCB design
w 120-Pin Designed by 60-Pin Fine Pitch Connector P1,P2
w Minimum 1,000,000 write cycle guarantee per sector
w 20-year data retention at 125 ^oC
w Flexible sector architecture
w Embedded algorithms
w Erase suspend / Erase resume
OPTIONS
w Timing
90ns access
100ns access
120ns access
w Packages
120-pin SMM
MARKING
-90
-100
-120
F
URL : www.hbe.co.kr
REV.02(August,2002)
1
HANbit Electronics Co., Ltd.