HMD4M64D16EV Datasheet, PDF (1/8 Pages) Hanbit Electronics Co.,Ltd – 32Mbyte(4Mx64) EDO Mode 4K Ref. 3.3V, DIMM 168 pin

HANBiT
HMD4M64D16EV
32Mbyte(4Mx64) EDO Mode 4K Ref. 3.3V, DIMM 168 pin
Part No. HMD4M64D16EV
GENERAL DESCRIPTION
The HMD4M64D16EV is a 4Mx64bits Dynamic RAM high density memory module. The HMD4M64D16EV consists of
sixteen CMOS 4Mx4bits DRAMs in SOJ/TSOPІІ 400mil packages mounted on a 168-pin glass-epoxy substrate. A 0.1 or
0.22uF decoupling capacitor is mounted on the printed circuit board for each DRAM. The HMD4M64D16EV is a Dual In-
line Memory Module and is intended for mounting into 168 pin edge connector sockets
FEATURES
PERFORMANCE RANGE
w Part Identification
HMD4M64D16EV --- 4KCycles/64ms Ref, Gold Plate Lead
w High-density 32MByte design
w New JEDEC standard proposal without buffer
w CAS-before-RAS Refresh capability
w RAS-only and Hidden refresh capability
w Single +3.3± 0.3V power supply
w EDO mode operation.
w LVTTL compatible inputs and outputs
w FR4-PCB design
w Access times : 50, 60ns
w Timing
w Marking
50ns access
-5
60ns access
w Packages
-6
w Marking
168-pin DIMM
D
SPEED
-5
-6
t_RAC
50ns
60ns
t_CAC
18ns
20ns
t_RC
84ns
104ns
t_HPC
20ns
25ns
PIN NAMES
Pin Name
Function
Pin Name
Function
Pin Name
Function
A0-A11 Address Input (4k /RAS0, /RAS2 Row
Address
Vss
Ground
ref)
Strobe
A0-A12 Address Input (8k /CAS0 - /CAS7 Column Address
NC
No Connection
ref)
Strobe
/W0,/W2 Read/Write Enable
SCL
Serial Clock
Vcc
Power (+3.3V)
/OE0,/OE2 Output Enable
DU
Don't use
SDA
SA0 – SA2 Address in EEPROM CB0 - CB7 Check Bit
DQ0-DQ63
l SA0-SA2,SCL,CB0-CB7,SDA will be used for Parity Mode. This model not used.
Serial Address /Data I/O
Data In/Out
URL:www.hbe.co.kr
REV.1.0 (August.2002)
-1-
HANBiT Electronics Co.,Ltd.