1447AA8 Datasheet, PDF (1/3 Pages) Hammond Manufacturing Ltd. – Type 12 Mild Steel Wallmount Disconnect Enclosure 1447 Series Continuous Hinge Door Flange w Allen Bradley 1494 D Series cutout only

Quality Products. Service Excellence.
Type 12 Mild Steel Wallmount Disconnect Enclosure 1447A Series
Continuous Hinge Door (Flange w/ Allen Bradley 1494 & D Series cutout only)
Note: This product line has been discontinued as a stocked series. Information is for reference only. For
alternative solution assistance, please contact Hammond Customer Service - [e-mail] or USA
[phone], Canada and International [phone].
Application
Designed to house Allen Bradley 1494F flange mounted disconnect
switches and 1494D flange mounted circuit breaker operators (will not
accept Allen Bradley 1494V disconnect switches).
Provides a degree of protection from falling dirt, dust, oil and water.
Standards
UL 508 Type 12, 13
CSA Type 12, 13
Complies with
NEMA Type 12, 13
JIC EGP-1-1967
IEC 60529, IP54
Appropriate components are required to maintain these standards.
Construction
Formed 14-gauge steel.
Continuously welded seams.
Larger sizes include door and body stiffeners.
Welded brackets provide for enclosure mounting.
Formed lip on door and enclosure exclude flowing liquids and
contaminants.
Cutouts and holes are provided to suit the handle, operating
mechanism and door closing mechanism.
Continuously hinged doors may be removed by pulling the hinge pin.
Guide and cover interlock brackets are welded to the door.
Cover latch bars for door hardware are provided.
A spacer kit to support the disconnect on the panel is included.
Collar studs are provided for mounting inner panels.
A removable 12 gauge inner panel is included.
Oil resistant gaskets are permanently secured and mechanically
retained.
A bonding stud is provided on the door and a grounding stud is
provided in the enclosure.
A literature pocket is provided.
Finish
Disconnects, operating mechanisms, and door hardware are not