1420B7 Datasheet, PDF (1/3 Pages) Hammond Manufacturing Ltd. – Type 1 Mild Steel Wallmount Enclosure 1420 Series Hinge Door With Quarter Turn and W Mounting Flange

Quality Products. Service Excellence.
Type 1 Mild Steel Wallmount Enclosure 1420 Series
Hinge Door with Quarter Turn and w/ Mounting Flange
Application
English | Français
Designed for indoor use to house controls, instruments and
components which do not require oil-tight or dust-tight protection.
Standards
UL 508 Type 1
CSA Type 1
Complies with
NEMA Type 1
IEC 60529, IP20
Construction
Enclosure is formed and spot welded from 12 or 14 gauge steel.
Removable 12 gauge inner panel is mounted to the rear of the
enclosure on collar studs.
Removable door is attached with slip hinges.
To remove door, a tool is required to remove the #8 screw which
captivates hinge.
Door is fastened with a slotted 1/4 turn latch; doors 30” and higher are
provided with two latches.
A bonding stud is provided on the door and a grounding stud is
provided in the box.
Piano hinge on 12 gauge units.
Finish
Enclosure and door are finished in ANSI 61 gray powder coating.
Inner panel is finished in white powder coating.
Accessories
Inner Panels
Breather Kits
Padlock Adaptor
Type 1 Lock Kit
Window Kits