|
109R Datasheet, PDF (1/2 Pages) Hammond Manufacturing Ltd. – MINIATURE EPOXY POTTED AUDIO TRANSFORMER | |||
|
Hammond Mfg. Co. Ltd., Electronics Division
www.hammondmfg.com
109R
MINIATURE EPOXY POTTED AUDIO TRANSFORMER
⢠Audio input, line matching and output transformers
⢠Epoxy potted in an attractive molded case, Pin type, P.C. board
mount, (min. 0.187â length)
⢠Rugged epoxy potted construction produces a completely
sealed unit withstanding severe environmental conditions.
⢠In some models where no center tap is present (on the
secondary), pin 5 is omitted.
⢠Secondary may be used as primary and primary as secondary.
⢠Will withstand soldering for 10 sec. @ 260 degrees C. ambient
temp. 85 degrees C max.
Power level: 2.0W @ 300 Hz. to 50 Khz.
-Freq. range @ +0 dbm is 300 Hz. to 50 Khz. +/- 1.5db
-Freq. range @ +10 dbm is 300 Hz. to 50 Khz. +/- 1.5db
-Freq. range @ +27 dbm is 300 Hz. to 50 Khz. +/- 1.5db
-Freq. measurements with no D.C. saturation.
ELECTRICAL SPECIFICATIONS
Characteristic
Input Impedance
Output Impedance
Output Power
DCR
Primary 1-3
Secondary 4-6
Inductance
Primary
Secondary
Typical
10 Kâ¦CT
1.5 Kâ¦CT
2 Watts
384 ⦠(234â¦/150â¦)
58 ⦠(29â¦/29â¦)
@ 300 Hz, 1.0 V OC
5.57 H
0.93 H
Leakage Inductance
14.00 mH
Impedance
Primary
Secondary
@ 300 Hz, 1.0 V OC
11.01 Kâ¦
1.83 Kâ¦
Frequency Response
Unbalanced DC
Turns ratio
Dielectric Strength
Temperature Range
±1.5db from 300Hz to 50KHz
0.75mA Max.
5.16:1
100 Vrms
-40 To 105°C**
PCB LAYOUT
6
5
4
MADE IN CANADA
1
2
3
SCHEMATIC DIAGRAM
PRIMARY
1
SECONDARY
6
10K⦠CT 2
5 1.5K⦠CT
N.T.S.
3
4
|
▷ |