|
109E Datasheet, PDF (1/2 Pages) Hammond Manufacturing Ltd. – MINIATURE EPOXY POTTED AUDIO TRANSFORMER | |||
|
Hammond Mfg. Co. Ltd., Electronics Division
www.hammondmfg.com
109E
MINIATURE EPOXY POTTED AUDIO TRANSFORMER
⢠Audio input, line matching and output transformers
⢠Epoxy potted in an attractive molded case, Pin type, P.C. board
mount, (min. 0.187â length)
⢠Rugged epoxy potted construction produces a completely
⢠sealed unit withstanding severe environmental conditions.
⢠In some models where no center tap is present (on the
secondary), pin 5 is omitted.
⢠Secondary may be used as primary and primary as secondary.
⢠Will withstand soldering for 10 sec. @ 260 degrees C. ambient
temp. 85 degrees C max.
Power level: 2.0W @ 300 Hz. to 50 Khz.
-Freq. range @ +0 dbm is 300 Hz. to 50 Khz. +/- 1.5db
-Freq. range @ +10 dbm is 300 Hz. to 50 Khz. +/- 1.5db
-Freq. range @ +27 dbm is 300 Hz. to 50 Khz. +/- 1.5db
-Freq. measurements with no D.C. saturation.
ELECTRICAL SPECIFICATIONS
Characteristic
Input Impedance
Output Impedance
Output Power
DCR
Primary 1-3
Secondary 4-6
Inductance
Primary
Secondary
Typical
600 â¦CT
3.2 â¦
2 Watts
40 ⦠(20â¦/20â¦)
0.27 ⦠(0.135â¦/0.135â¦)
@ 1.0 kHz, 1.0 V OC
0.48 H
2.66 mH
Leakage Inductance
3.58 mH
Impedance
Primary
Secondary
@ 1.0 kHz, 1.0 V OC
3.16 Kâ¦
17.5 â¦
Frequency Response
Unbalanced DC
Turns ratio
Dielectric Strength
Temperature Range
±1.5db from 300Hz to 50KHz
6mA Max.
6.88:1
100 Vrms
-40 To 105°C**
PCB LAYOUT
6
5
4
MADE IN CANADA
1
2
3
SCHEMATIC DIAGRAM
PRIMARY
1
SECONDARY
6
600 ⦠CT 2
5 3.2 ⦠CT
N.T.S.
3
4
|
▷ |