108P Datasheet, PDF (1/2 Pages) Hammond Manufacturing Ltd. – MINIATURE EPOXY POTTED AUDIO TRANSFORMER

Hammond Mfg. Co. Ltd., Electronics Division
www.hammondmfg.com
108P
MINIATURE EPOXY POTTED AUDIO TRANSFORMER
Audio input, line matching and output transformers
Epoxy potted in an attractive molded case, Pin type, P.C. board mount, (min. 0.187” length)
Rugged epoxy potted construction produces a completely
sealed unit withstanding severe environmental conditions.
In some models where no center tap is present (on the secondary), pin 5 is omitted.
Secondary may be used as primary and primary as secondary.
Will withstand soldering for 10 sec. @ 260 degrees C, ambient temp. 85 degrees C max.
Power level: 150mw @ 300 Hz. to 50 Khz.
-Freq. range @ +0 dbm is 300 Hz. to 50 Khz. +/- 1.5db
6
-Freq. range @ +10 dbm is 300 Hz. to 100 Khz. +/- 1.5db
-Freq. range @ +20 dbm is 300 Hz. to 100 Khz. +/- 1.5db
-Freq. measurements with no D.C. saturation.
1
ELECTRICAL SPECIFICATIONS
65 4
108P
MADE IN
CANADA
12 3
5
4
108P
CANADA
2
3
Characteristic
Input Impedance
Output Impedance
Output Power
DCR
Primary 1-3
Secondary 4-6
Inductance
Primary
Secondary
Typical
10000 ΩCT
1500 ΩCT
0.500 Watts
438Ω (255Ω/183Ω)
110 Ω (55Ω/55Ω)
@ 1.0 kHz, 1.0 V OC
9.0 H
1.60 H
Leakage Inductance
3.50 H
Impedance
Primary
Secondary
@ 1.0 kHz, 1.0 V OC
43.5 KΩ
7.20 KΩ
Frequency Response ±1.5db from 300Hz to 50KHz
Turns ratio
2.58:1
SCHEMATIC DIAGRAM
PRIMARY
1
SECONDARY
6
Dielectric Strength
Temperature Range
500 Vrms
-40 To 105°C**
10000 Ω CT 2
5 1500 ^{Ω CT}
PCB LAYOUT
3
4