108L_13 Datasheet, PDF (1/2 Pages) Hammond Manufacturing Ltd. – MINIATURE EPOXY POTTED AUDIO TRANSFORMER

Hammond Mfg. Co. Ltd., Electronics Division
www.hammondmfg.com
108L
MINIATURE EPOXY POTTED AUDIO TRANSFORMER
Audio input, line matching and output transformers
Epoxy potted in an attractive molded case, Pin type, P.C. board
6
mount, (min. 0.187” length)
Rugged epoxy potted construction produces a completely
sealed unit withstanding severe environmental conditions.
In some models where no center tap is present (on the secondary), pin 5 is omitted.
Secondary may be used as primary and primary as secondary.
Will withstand soldering for 10 sec. @ 260 degrees C, ambient temp. 85 degrees C max.
1
54
108L
MADE IN
CANADA
23
Power level: 500mw @ 300 Hz. to 50 Khz.
-Freq. range @ +0 dbm is 300 Hz. to 50 Khz. +/- 1.50db
-Freq. range @ +10 dbm is 300 Hz. to 100 Khz. +/- 1.50db
-Freq. range @ +27 dbm is 300 Hz. to 100 Khz. +/- 1.50db
-Freq. measurements with no D.C. saturation.
ELECTRICAL SPECIFICATIONS
6
5
4
108L
CANADA
1
2
3
Characteristic
Input Impedance
Output Impedance
Output Power
DCR
Primary 1-3
Secondary 6-8
Inductance
Primary
Secondary
Leakage Inductance
Impedance
Primary
Secondary
Typical
10000 ΩCT
3.2 Ω
0.500 Watts
350 Ω (144Ω/206Ω)
0.20 Ω
@ 1.0 kHz, 1.0 V OC
3.25 H
1.20 mH
8.80 mH
@ 1.0 kHz, 1.0 V OC
24.5 KΩ
9.90 Ω
SCHEMATIC DIAGRAM
PRIMARY
1
SECONDARY
6
Frequency Response ±1.5db from 300Hz to 50KHz
Turns ratio
55.8:1
Dielectric Strength
Temperature Range
100 Vrms
-40 To 105°C**
10 K Ω CT 2
3.2 Ω CT
PCB LAYOUT
3
4