|
108K Datasheet, PDF (1/2 Pages) Hammond Manufacturing Ltd. – MINIATURE EPOXY POTTED AUDIO TRANSFORMER | |||
|
Hammond Mfg. Co. Ltd., Electronics Division
www.hammondmfg.com
108K
MINIATURE EPOXY POTTED AUDIO TRANSFORMER
Audio input, line matching and output transformers
Epoxy potted in an attractive molded case, Pin type, P.C. board
mount, (min. 0.187â length)
6
Rugged epoxy potted construction produces a completely
sealed unit withstanding severe environmental conditions.
In some models where no center tap is present (on the secondary), pin 5 is omitted.
Secondary may be used as primary and primary as secondary.
Will withstand soldering for 10 sec. @ 260 degrees C, ambient temp. 85 degrees C max.
1
Power level: 500mw @ 300 Hz. to 50 Khz.
-Freq. range @ +0 dbm is 300 Hz. to 50 Khz. +/- 1.5db
-Freq. range @ +15 dbm is 300 Hz. to 50 Khz. +/- 1.5db
-Freq. range @ +27 dbm is 300 Hz. to 50 Khz. +/- 1.5db
-Freq. measurements with no D.C. saturation.
6
5
54
108K
MADE IN
CANADA
23
4
ELECTRICAL SPECIFICATIONS
108K
CANADA
1
2
3
Characteristic
Input Impedance
Output Impedance
Output Power
DCR
Primary 1-3
Secondary 4-6
Inductance
Primary
Secondary
Typical
1.5 Kâ¦CT
600 â¦CT
0.500 Watts
140⦠(70â¦/70â¦)
66⦠(33â¦/33â¦)
@ 1.0 kHz, 1.0 V OC
2.40 H
0.94 H
Leakage Inductance
6.50 mH
Impedance
Primary
Secondary
@ 1.0 kHz, 1.0 V OC
21.5 Kâ¦
9.0 Kâ¦
Frequency Response
Unbalanced DC
Turns ratio
Dielectric Strength
Temperature Range
±1.5db from 300Hz to 50KHz
6mA Max.
1.58:1
100 Vrms
-40 To 105°C**
PCB LAYOUT
SCHEMATIC DIAGRAM
PRIMARY
1
SECONDARY
6
1.5K ⦠CT 2
5 600 ⦠CT
3
4
|
▷ |