108G Datasheet, PDF (1/2 Pages) Hammond Manufacturing Ltd. – MINIATURE EPOXY POTTED AUDIO TRANSFORMER

Hammond Mfg. Co. Ltd., Electronics Division
www.hammondmfg.com
108G
MINIATURE EPOXY POTTED AUDIO TRANSFORMER
Audio input, line matching and output transformers
Epoxy potted in an attractive molded case, Pin type, P.C. board
mount, (min. 0.187” length)
Rugged epoxy potted construction produces a completely
sealed unit withstanding severe environmental conditions.
In some models where no center tap is present (on the secondary), pin 5 is omitted.
Secondary may be used as primary and primary as secondary.
Will withstand soldering for 10 sec. @ 260 degrees C, ambient temp. 85 degrees C max.
Power level: 500mw @ 300 Hz. to 50 Khz.
-Freq. range @ +0 dbm is 300 Hz. to 50 Khz. +/- 1.5db
-Freq. range @ +15 dbm is 300 Hz. to 50 Khz. +/- 1.5db
-Freq. range @ +27 dbm is 300 Hz. to 50 Khz. +/- 1.5db
-Freq. measurements with no D.C. saturation.
ELECTRICAL SPECIFICATIONS
65 4
108G
MADE IN
CANADA
12 3
6
5
4
108G
CANADA
1
2
3
Characteristic
Input Impedance
Output Impedance
Output Power
DCR
Primary 1-3
Secondary 4-6
Inductance
Primary
Secondary
Typical
600 ΩCT
250 ΩCT
0.500 Watts
54 Ω (27Ω/27Ω)
27.0 Ω (13.5Ω/13.5Ω)
@ 1.0 kHz, 1.0 V OC
0.95 Hy
0.38 Hy
Leakage Inductance
3.00 mH
Impedance
Primary
Secondary
@ 1.0 kHz, 1.0 V OC
8.20 KΩ
3.33 KΩ
Frequency Response ±1.5db from 300Hz to 50KHz
Unbalanced DC
6mA Max.
Turns ratio
1.55:1
Dielectric Strength
100 Vrms
Temperature Range
-40 To 105°C**
SCHEMATIC DIAGRAM
PRIMARY
1
SECONDARY
6
600 Ω CT 2
5 250Ω CT
PCB LAYOUT
3
4