108F Datasheet, PDF (1/2 Pages) Hammond Manufacturing Ltd. – MINIATURE EPOXY POTTED AUDIO TRANSFORMER

Hammond Mfg. Co. Ltd., Electronics Division
www.hammondmfg.com
108F
MINIATURE EPOXY POTTED AUDIO TRANSFORMER
6
Audio input, line matching and output transformers
Epoxy potted in an attractive molded case, Pin type, P.C. board
mount, (min. 0.187” length)
Rugged epoxy potted construction produces a completely
sealed unit withstanding severe environmental conditions.
1
In some models where no center tap is present (on the secondary), pin 5 is omitted.
Secondary may be used as primary and primary as secondary.
Will withstand soldering for 10 sec. @ 260 degrees C, ambient temp. 85 degrees C max.
Power level: 500mw @ 300 Hz. to 50 Khz.
-Freq. range @ +0 dbm is 300 Hz. to 50 Khz. +/- 2.5db
-Freq. range @ +15 dbm is 300 Hz. to 50 Khz. +/- 2.5db
-Freq. range @ +27 dbm is 300 Hz. to 50 Khz. +/- 2.5db
-Freq. measurements with no D.C. saturation.
ELECTRICAL SPECIFICATIONS
Characteristic
Input Impedance
Output Impedance
Output Power
DCR
Primary 1-3
Secondary 4-6
Inductance
Primary
Secondary
Typical
600 ΩCT
150 ΩCT
0.500 Watts
54 Ω (27Ω/27Ω)
17.0 Ω (8.5Ω/8.5Ω)
@ 1.0 kHz, 1.0 V OC
0.95 Hy
0.24 Hy
6
5
4
108F
CANADA
1
2
3
54
108F
MADE IN
CANADA
23
Leakage Inductance
3.26 mH
Impedance
Primary
Secondary
@ 1.0 kHz, 1.0 V OC
8.20 KΩ
2.00 KΩ
Frequency Response ±2.5db from 300Hz to 50KHz
Unbalanced DC
6mA Max.
Turns ratio
2:1
Dielectric Strength
100 Vrms
Temperature Range
-40 To 105°C**
SCHEMATIC DIAGRAM
PRIMARY
1
SECONDARY
6
600 Ω CT 2
5 150Ω CT
PCB LAYOUT
3
4