|
108E Datasheet, PDF (1/2 Pages) Hammond Manufacturing Ltd. – MINIATURE EPOXY POTTED AUDIO TRANSFORMER | |||
|
Hammond Mfg. Co. Ltd., Electronics Division
www.hammondmfg.com
108E
MINIATURE EPOXY POTTED AUDIO TRANSFORMER
6
Audio input, line matching and output transformers
Epoxy potted in an attractive molded case, Pin type, P.C. board
mount, (min. 0.187â length)
Rugged epoxy potted construction produces a completely
sealed unit withstanding severe environmental conditions.
1
In some models where no center tap is present (on the secondary), pin 5 is omitted.
Secondary may be used as primary and primary as secondary.
Will withstand soldering for 10 sec. @ 260 degrees C, ambient temp. 85 degrees C max.
Power level: 500mw @ 300 Hz. to 50 Khz.
-Freq. range @ +0 dbm is 300 Hz. to 50 Khz. +/- 1.75db
-Freq. range @ +15 dbm is 300 Hz. to 50 Khz. +/- 1.75db
-Freq. range @ +27 dbm is 300 Hz. to 50 Khz. +/- 1.75db
-Freq. measurements with no D.C. saturation.
ELECTRICAL SPECIFICATIONS
Characteristic
Input Impedance
Output Impedance
Output Power
DCR
Primary 1-3
Secondary 4-6
Inductance
Primary
Secondary
Typical
600 â¦CT
3.2 â¦
0.500 Watts
54 ⦠(27â¦/27â¦)
0.40 â¦
@ 1.0 kHz, 1.0 V OC
0.95 H
5.5 mH
6
5
4
108E
CANADA
1
2
3
54
108E
MADE IN
CANADA
23
Leakage Inductance
2.60 mH
Impedance
Primary
Secondary
@ 1.0 kHz, 1.0 V OC
8.20 Kâ¦
53.5 â¦
Frequency Response
Unbalanced DC
Turns ratio
Dielectric Strength
Temperature Range
±1.75db from 300Hz to 50KHz
6mA Max.
13.71:1
100 Vrms
-40 To 105°C**
SCHEMATIC DIAGRAM
PRIMARY
1
SECONDARY
6
600 ⦠CT 2
3.2 â¦
PCB LAYOUT
3
4
|
▷ |