MRPR-8 Datasheet, PDF (1/1 Pages) HAMLIN Position and Movement Sensor Solutions – Miniature normally open switch size with 20.32mm x 2.84mm

www.hamlin.com
MRPR-8 Features and Benefits
Features
• Miniature normally open switch
size with 20.32mm x 2.84mm
(0.800” x 0.112”) glass envelope
• Capable of switching up to
265Vac
• Maximum contact rating 50
Watts
• Minimum voltage breakdown 750
Vdc
• 10¹⁰ Ohms insulation resistance
• Available sensitivity range 22-43 AT
Benefits
• Hermetically sealed switch
contacts are not effected by and
have no effect on their external
environment
• Low, stable contact resistance
• Low space requirement
• Zero operating power required
for contact closure
• Fit and forget durability
DIMENSIONS (in) mm
Applications
• Reed relays (suitable for
switching European mains
voltage)
• Limit switching
• Telecoms line switching
• White goods applications
• Automotive applications
• European mains voltage
switching
Switch Type
Contact Form
Underwriters Laboratories Recognised, File E47258 (see note 1)
ELECTRICAL RATINGS
Contact Rating (2)
Voltage
Switching
Breakdown
Current
Switching
Carry
Resistance
Contact, Initial
Insulation
Capacitance
Contact
Temperature
Operating
Storage (6)
OPERATING CHARACTERISTICS
Operate Time (3)
Release Time (3)
Shock
11ms ¹â„2 sine wave
Vibration
50-2000 Hertz
Resonant Frequency
MAGNETIC CHARACTERISTICS
Pull-In Range (4)
Rating Sensitivity (5)
Test Coil
Watt - max.
V - max.
Vdc - min.
A - max.
A - max.
Ω - max.
Ω - min.
pF - typ.
°C
°C
ms - max.
ms - max.
G - max.
G - max.
Hz - typ.
Ampere Turns
Ampere Turns
Notes
1) For details on electrical specifications, contact Hamlin.
2) Contact rating-Product of the switching voltage and current should never exceed the
wattage rating.
Contact Hamlin for additional load/life information.
3) Operate (inc. bounce) /Release Time-per EIA/NARM RS421A, diode suppressed coil.
MRPR-8
A
50
265 Vac rms (250Vdc)
750
1.0
2.5
0.100
10¹⁰
0.2
-20 to +125
-65 to +125
0.75
0.3
100
30
2100
22-43
22
L4989
4) Pull in Range-Contact Hamlin for tolerances available within this range.
5) Rating Sensitivity-The value at which contact ratings and operating characteristics are
determined. Derating may be required below this value.
6) Storage Temperature-Long time exposure at elevated temperature may degrade
solderability of the leads.
Hamlin USA Tel: [phone] • Fax: [phone] • Email: [e-mail]
Hamlin UK
Tel: [phone] • Fax: [phone] • Email: [e-mail]
Hamlin Germany Tel: [phone] • Fax: [phone] • Email: [e-mail]
Hamectrol France Tel: [phone] • Fax: [phone] • Email: [e-mail]
INFORMATION PROVIDED ON THIS DATA SHEET IS PROVIDED FOR INFORMATION PURPOSES ONLY AND SHOULD NOT BE RELIED UPON AS BEING ACCURATE FOR ANY
PARTICULAR PURPOSE. Product performance may be affected by the application to which the product is applied. Upon request, HAMLIN will assist purchasers by providing information
specific to any particular application. HAMLIN disclaims any and all liability whatsoever for any purchaser’s reliance upon the information contained on this data sheet without further
consultation with authorised representatives of HAMLIN.
ISSUE No: 4 DATE: 1/5/3