MLSM-4 Datasheet, PDF (1/2 Pages) HAMLIN Position and Movement Sensor Solutions – Surface mounting normally open switch

® _{File E47258}
www.hamlin.com
MLSM-4 REED SWITCH
Features
• Surface mounting normally open switch
• Miniature size with 15.24mm x 2.66mm
(0.600” x 0.105”) glass envelope
• Capable of switching 200Vdc or 1A
at up to 20W
• 10¹⁰ Ohms insulation resistance
• Available sensitivity 17-38 AT
• Bulk or tape and reel packaging. See sheet 2
Benefits
• Hermetically sealed switch contacts
are not affected by and have no effect
on their external environment
• Low, stable contact resistance
• Very small space requirements
• Zero operating power required for
contact closure
• Fit and forget durability
Applications
• Position sensing
• Level sensing
• Security
• Telecoms
• Office Equipment
• Lamp Loads up to
2W @ 14V
SWITCH DIMENSIONS (in) mm
(.600)MAX
15,24
(.105)MAX
Ø2,66
RECOMMENDED LAND PATTERN
(.048±.004)TYP
1,22±0.10
(.640)
16,26
(.092)TYP
2,34
(.690±.010)
17,52±0.25
(.000)MIN
0,00
(.118)MAX
3,00
(.059)TYP
1,50
SWITCH TYPE
(.770±.010)
19,56±0.25
MLSM-4
ELECTRICAL RATINGS
Contact Form A - Normally Open
Contact Rating (1)
Voltage
Current
Resistance
Capacitance
Power
Switching
Breakdown
Switching
Carry
Contact, Initial
Insulation
Contact
Watts - max
Vdc - max.
Vdc - min.
A - max.
A - max.
Ohms - max.
Ohms - min.
pF - typ.
20
200
250
1.0
1.0
0.10
10¹⁰
0.4
Temperature
Operating
°C
Storage (2)
°C
OPERATING CHARACTERISTICS
-40 to +125
-65 to +125
Time
Operate (3)
ms - max.
0.7
Release (3)
ms - max.
0.2
Shock
11ms ½ sine
G - max.
100
Vibration
50-2000 Hz.
G - max.
30
Resonant Frequency
kHz -typ.
6.0
MAGNETIC CHARACTERISTICS
Pull-In Ranges Available Switch AT before modification
Ampere Turns (AT)
17-23, 22-28, 27-33 & 32-38
Rating Sensitivity (4)
Ampere Turns (AT)
20
Test Coil
L4989
Notes:- 1) Contact Rating. Product of the switching voltage and current must never exceed the wattage rating. Contact Hamlin for additional load/life information.
2) Storage Temperature. Long term exposure at elevated temperature may degrade solderability of the leads.
3) Operate (including bounce) /Release Time. Tested per EIA/NARM RS421A with diode suppressed coil.
4) Rating Sensitivity. The value at which the contact ratings and operating characteristics are determined. De-rating may be required below this value.
Hamlin USA
Hamlin UK
Hamlin Germany
Hamectrol France
Tel: [phone] Fax: [phone] Email: [e-mail] DETAILS ON THIS DATA SHEET ARE PROVIDED FOR INFORMATION PURPOSES ONLY &
Tel: [phone] Fax: [phone] Email: [e-mail] SHOULD NOT BE RELIED UPON AS BEING ACCURATE FOR ANY PARTICULAR PURPOSE
Product performance may be affected by the application that the part is used for.
Upon request Hamlin will assist purchasers by providing information specific to a particular application.
Tel: [phone] Fax: [phone] Email: [e-mail] Hamlin disclaims all liability whatsoever for any purchaser’s reliance upon the information
contained in this data sheet without further consultation with Hamlin’s authorised representatives.
Sheet 1 of 2 Sheets
Tel: [phone] Fax: [phone] Email: [e-mail]
Issue:1 19/11/04 DCR:B2737