MDRR-DT Datasheet, PDF (1/1 Pages) HAMLIN Position and Movement Sensor Solutions – Miniature changeover switch with 14.73mm x 2.54mm

www.hamlin.com
MDRR-DT Features and Benefits
Features
• Miniature changeover switch
with 14.73mm x 2.54mm (0.580”
x 0.100”) glass envelope
• Capable of switching 175Vdc at
up to 5 Watts
• Minimum voltage breakdown 200
Vdc
• 10⁹ Ohms insulation resistance
• Available sensitivity range 15-30 AT
Benefits
• Hermetically sealed switch contacts
are not effected by and have no effect
on their external environment
• Can be used as changeover or
normally closed contact
• Low, stable contact resistance
• Low space requirement
• Zero operating power required for
contact closure
• Fit and forget durability
Applications
• Reed relays
• Limit switching
• Telecoms applications
• Office equipment
• Automotive applications
DIMENSIONS (in) mm
Switch Type
Contact Form
Underwriters Laboratories Recognised, File E47258 (see note 1)
ELECTRICAL RATINGS
Contact Rating (2)
Voltage
Switching
Breakdown
Current
Switching
Carry
Resistance
Contact, Initial
Insulation
Capacitance
Contact
Temperature
Operating
Storage (6)
OPERATING CHARACTERISTICS
Operate Time (3)
Release Time (3)
Shock
11ms ¹â„2 sine wave
Vibration
50-2000 Hertz
Resonant Frequency
MAGNETIC CHARACTERISTICS
Pull-In Range (4)
Rating Sensitivity (5)
Test Coil
Watt - max.
Vdc - max.
Vdc - min.
A - max.
A - max.
Ω - max.
Ω - min.
pF - typ.
°C
°C
ms - max.
ms - max.
G - max.
G - max.
Hz - typ.
Ampere Turns
Ampere Turns
MDRR-DT
C
5
175
200
0.25
1.5
0.100
10⁹
1.0
-40 to +125
-65 to +125
0.7
1.0
50
30
11000
15-30
20
L4989
Notes
1) For details on electrical specifications, contact Hamlin.
2) Contact rating-Product of the switching voltage and current should never exceed the
wattage rating.
Contact Hamlin for additional load/life information.
3) Operate (inc. bounce) /Release Time-per EIA/NARM RS421A, diode suppressed coil.
4) Pull in Range-Contact Hamlin for tolerances available within this range.
5) Rating Sensitivity-The value at which contact ratings and operating characteristics are
determined. Derating may be required below this value.
6) Storage Temperature-Long time exposure at elevated temperature may degrade
solderability of the leads.
Hamlin USA Tel: [phone] • Fax: [phone] • Email: [e-mail]
Hamlin UK
Tel: [phone] • Fax: [phone] • Email: [e-mail]
Hamlin Germany Tel: [phone] • Fax: [phone] • Email: [e-mail]
Hamectrol France Tel: [phone] • Fax: [phone] • Email: [e-mail]
INFORMATION PROVIDED ON THIS DATA SHEET IS PROVIDED FOR INFORMATION PURPOSES ONLY AND SHOULD NOT BE RELIED UPON AS BEING ACCURATE FOR ANY
PARTICULAR PURPOSE. Product performance may be affected by the application to which the product is applied. Upon request, HAMLIN will assist purchasers by providing information
specific to any particular application. HAMLIN disclaims any and all liability whatsoever for any purchaser’s reliance upon the information contained on this data sheet without further
consultation with authorised representatives of HAMLIN.
ISSUE No: 4 DATE: 1/5/3