HAMLINMDCG4 Datasheet, PDF (1/1 Pages) HAMLIN Position and Movement Sensor Solutions – MDCG-4 Features and Benefits

www.hamlin.com
MDCG-4 Features and Benefits
Features
• Sub-miniature normally open
switch with 15.24mm x 2.28mm
(0.600” x 0.090”) glass envelope
• Capable of switching up to
200Vdc
• Maximum contact rating 10
Watts
• 10¹⁰ Ohms insulation resistance
• Available sensitivity range
12-38 AT
• Surface mount version available
Benefits
• Hermetically sealed switch
contacts are not effected by and
have no effect on their external
environment
• Low, stable contact resistance
• Low space requirement
• Zero operating power required
for contact closure
• Fit and forget durability
• Well suited to signal switching
applications
DIMENSIONS (in) mm
Applications
• Reed relays
• Security
• Limit switching
• Telecoms
• Office equipment
Switch Type
Contact Form
Underwriters Laboratories Recognised, File E47258 (see note 1)
ELECTRICAL RATINGS
Contact Rating (2)
Voltage
Switching
Breakdown
Current
Switching
Carry
Resistance
Contact, Initial
Insulation
Capacitance
Contact
Temperature
Operating
Storage (6)
OPERATING CHARACTERISTICS
Operate Time (3)
Release Time (3)
Shock
11ms ¹â„2 sine wave
Vibration
50-2000 Hertz
Resonant Frequency
MAGNETIC CHARACTERISTICS
Pull-In Range (4)
Rating Sensitivity (5)
Test Coil
Watt - max.
Vdc - max.
Vdc - min.
A - max.
A - max.
Ω - max.
Ω - min.
pF - typ.
°C
°C
ms - max.
ms - max.
G - max.
G - max.
Hz - typ.
Ampere Turns
Ampere Turns
Notes
1) For details on electrical specifications, contact Hamlin.
2) Contact rating-Product of the switching voltage and current should never exceed the
wattage rating.
Contact Hamlin for additional load/life information.
3) Operate (inc. bounce) /Release Time-per EIA/NARM RS421A, diode suppressed coil.
MDCG-4
A
10
200
250
0.5
1.2
0.100
10¹⁰
0.2
-40 to +125
-65 to +125
0.6
0.2
100
30
3900
12-38
20
L4989
4) Pull in Range-Contact Hamlin for tolerances available within this range.
5) Rating Sensitivity-The value at which contact ratings and operating characteristics are
determined. Derating may be required below this value.
6) Storage Temperature-Long time exposure at elevated temperature may degrade
solderability of the leads.
Hamlin USA Tel: [phone] • Fax: [phone] • Email: [e-mail]
Hamlin UK
Tel: [phone] • Fax: [phone] • Email: [e-mail]
Hamlin Germany Tel: [phone] • Fax: [phone] • Email: [e-mail]
Hamectrol France Tel: [phone] • Fax: [phone] • Email: [e-mail]
INFORMATION PROVIDED ON THIS DATA SHEET IS PROVIDED FOR INFORMATION PURPOSES ONLY AND SHOULD NOT BE RELIED UPON AS BEING ACCURATE FOR ANY
PARTICULAR PURPOSE. Product performance may be affected by the application to which the product is applied. Upon request, HAMLIN will assist purchasers by providing information
specific to any particular application. HAMLIN disclaims any and all liability whatsoever for any purchaser’s reliance upon the information contained on this data sheet without further
consultation with authorised representatives of HAMLIN.
ISSUE No: 4 DATE: 1/5/3