HAMLIN55100 Datasheet, PDF (1/1 Pages) HAMLIN Position and Movement Sensor Solutions – 55100 Miniature Flange Mount Hall Effect Proximity Sensor

www.hamlin.com
55100 Miniature Flange Mount Hall Effect Proximity Sensor
Features
● Magnetically operated position sensor
● Digital, latching or programmable analogue
types available
● Medium, high or programmable sensitivities
● 3 wire (voltage output) or 2 wire (current
output) versions
● Reverse/Over voltage protection
● Built in temperature compensation
Benefits
● High switching speed up to 10kHz
● Long life; up to 20 billion operations
● Unaffected by harsh environments
● Operates in static or dynamic magnetic
field
● Customer selection of cable length and
connector type
Applications
● Position and limit sensing
● RPM measurement
● Flow metering
● Commutaion of brushless dc motors
● Angle sensing
● Magnetic encoders
DIMENSIONS (in) mm
BLOCK DIAGRAM
Notes:
1) Add capcitor Cn as
shown, close to the
sensor, for transient
suppression if required.
2) Add resistor Rpu as
shown for sinking output
SPECIFICATIONS
Digital Switch or Digital Latch Digital Switch or Digital Latch
A - Analogue
Hall Type
3 Wire (Voltage Output)
2 Wire (Current Output)
(Programmable Only) (Note 2)
Supply Voltage (Note 1)
Absolute Ratings
Vdc
-15 to +28
-15 to +28
8.5
Operate
Vdc
+3.8 to +24
+3.75 to +24
4.5 - 5.5
Overvoltage Protection
Vdc - max.
32
32
19.5
Output High Voltage
Vdc
Sinking output
N/A
4.65
Output Low Voltage
Vdc - max.
0.4 @ 10mA
N/A
0.35
Output Current (continuously on)
mA - max.
10
N/A
-1.0 to +1.0
Current Consumption Over
Temperature Range
Switching Speed
Low
High
mA
1.6 - 5.2
mA
1.6 - 5.2
mA
10
5 - 6.9
12 - 17
10
2 - 10
2 - 10
2
Temperature
Operating
°C
Storage
°C
Note 1: As long as Tj (Junction Temperature max. Is not exceeded.
Note 2: Preprogrammed by Hamlin or Customer pending agreement.
-40 to +100
-65 to +105
-40 to +100
-65 to +105
-40 to +100
-65 to +105
CUSTOMER OPTIONS - Sensitivity, Cable Length and Termination Specification
TABLE 1
HALL OPTIONS
ACTIVATE DISTANCES ARE APPROXIMATE
USING NEFEB MAGNET
(.827l x .276W x .185H) 21 x 7 x 4.7
HAMLIN P/N 5812334000
Select Hall Option
Hall Type
2M
2 Wire Switch
2H
2 Wire Switch
2L
2 Wire Latch
3M
3 Wire Switch
3H
3 Wire Switch
3L
3 Wire Latch
AP
Analog
Sensitivity Gauss
(typ.)
120
57
40
130
59
86
Programmable
Activate - d (in)
mm
(.531) 13,5
(.728) 18,5
(.827) 21,0
(.492) 12,5
(709) 18,0
(.394) 10,0
Consult Hamlin
TABLE 2
Cable Length:-
(Cable Type 24AWG 7/32 PVC 105° C
UL 1430/UL1569)
Standard Lengths
SELECT
OPTION
01
CABLE
LENGTH
(in) mm
(3.94) 100
02
(11.81) 300
03
(19.69) 500
04
(29.53) 750
05
(39.37)
1000
TABLE 3
Termination Options:-
SELECT OPTION DESCRIPTION (2 WIRE VERSION ILLUSTRATED
A
Tinned Leads
D
AMP MTE 2.54mm pitch
E
JST XHP 2.5mm pitch
ORDERING INFORMATION
55100
XX
XX
X
Series 55100
Hall Option
Cable Length
Termination
Table 1
Table 2
Table 3
Hamlin USA
Hamlin Europe
Hamlin China
Tel: [phone] • Fax: [phone] • Email: [e-mail]
Tel: [phone] • Fax: [phone] • Email: [e-mail]
Tel: [phone] • Fax: [phone] • Email: [e-mail]
DRGNo: 55100XXXXX REV : AG Date:9/6/12 DCR: B9016