55505-00-01-A Datasheet, PDF (1/1 Pages) HAMLIN Position and Movement Sensor Solutions – Flange Mount Hall Effect Geartooth Sensor

www.hamlin.com
DIMENSIONS (in) mm
55505 Flange Mount Hall Effect Geartooth Sensor
Features
Benefits
Applications
• Ferrous target sensing
• Internal circuit protection
• Protection against severe and
automotive environments
• Self adjusting magnetic range
• Automotive grade circuit protection
• High speed operation
• Short circuit and reverse voltage
protection
• On board 10 bit A/D convertor
• No chopper delay
• Rotational alignment to target not
critical
• Immune to target run out
• Wheel, transmission and camshaft
speed sensing
• Gear tooth sensor
• Rotary encoders
• Industrial
• Commercial
• Automotive
BLOCK DIAGRAM
(1.630)
41,40
(.866)
22,00
(1.250)
31,75
(.236)
6,00
(.197)
5,00
Table 1 +/-
(.393) 10,00
(.260)
ø6,60
(.937)
ø23,80
(.703)
ø17,86
(.638)
ø16,20
SPECIFICATIONS
SPECIFICATIONS
Hall Type
Supply Voltage
Operate
Supply Voltage
Overvoltage Protection
Supply Voltage
Reverse Voltage Protection
Output High Voltage
Output Low Voltage
Output Current (continuously on)
Current Consumption
Current Consumption
Switching Speed
Temperature
Operating
Temperature
Storage
Vdc
Vdc-max.
Vdc-max.
Vdc
Vdc-max.
mA-max.
mA-max.
mA-max.
kHz-max.
o_C
o_C
(.250)
6,35 Nom
VDD
Pin 3
(Red)
R1
Rpu
Hall
Plate
C1
Switch
Comparator
Clock
Output
C2
GND
Pin 1
(Black)
OUT
Pin 2
(W/B*)
*White with Black Stripe
Digital Switch 3 Wire (Voltage Output)
4.75 to 24
27
-25
VDD -2 (sinking output with internal pull-up)
0.6 @ 20mA
20
1
10.5
15
-40 to +125
-65 to + 125
APPLICATION EXAMPLE - Geartooth Sensor
.197 (5mm)
Max.
Typical Output
CUSTOMER OPTIONS - Cable Length and Termination
TABLE 1
Cable Length Options:-
(Cable Type 20 AWG
Type TXL per SAE J-1128)
SELECT
OPTION
LENGTH
mm
01
(3,94) 100
TABLE 2
Termination Options:-
SELECT
OPTION
DESCRIPTION
A
Tinned leads
02
(11,81) 300
03
(19,69) 500
B
Deutsch DTM04-3P
04
(29,53) 750
05
(39,37) 1000
C
Molex MX 150
ORDERING INFORMATION
595053065
00
XX
XT
Series 55505
Cable Length
Termination
Table 1
Table 2
Hamlin USA Tel: [phone] • Fax: [phone] • Email: [e-mail]
Hamlin UK
Tel: [phone] • Fax: [phone] • Email: [e-mail]
Hamlin Germany Tel: [phone] • Fax: [phone] • Email: [e-mail]
Hamectrol France Tel: [phone] • Fax: [phone] • Email: [e-mail]
Issue No: A C Date: 08.01.09 DCR B6063
INFORMATION PROVIDED ON THIS DATA SHEET IS PROVIDED FOR INFORMATION
PURPOSES ONLY AND SHOULD NOT BE RELIED UPON AS BEING ACCURATE FOR ANY
PARTICULAR PURPOSE. Product performance may be affected by the application to which the
product is put. Upon request, HAMLIN will assist purchasers by providing information specific
to any particular application. HAMLIN disclaims any and all liability whatsoever for any
purchaser’s reliance upon the information contained on this data sheet without further
consultation with authorised representatives of HAMLIN.