55100-2M-01-A Datasheet, PDF (1/1 Pages) HAMLIN Position and Movement Sensor Solutions – Mini Flange Mount Hall Effect Sensor Features and Benefits

www.hamlin.com
55100 Mini Flange Mount Hall Effect Sensor Features and Benefits
Features
• Magnetically operated position sensor
• Digital, latching or programmable
analogue types available
• Medium, high or programmable
senisitivities
• 3 wire (voltage output) or 2 wire
(current output) versions
• Vibration 50g max. @ 50-2,000Hz
• Shock 150g max. @ 11ms ¹/2 Sine
• EMC to DIN 40839 (Consult Hamlin)
• Reverse/Over Voltage Protection
• Built in temperature compensation
Benefits
• High switching speed up to 10kHz
• Long life; up to 20 billion operations
• Unaffected by harsh environments
• Operates in static or dynamic magnetic
field
• Customer selection of cable length and
connector type
Applications
• Position and limit sensing
• RPM measurement
• Flow metering
• Commutation of brushless dc motors
• Angle sensing
• Magnetic encoders
DIMENSIONS (in) mm
BLOCK DIAGRAMS
Notes
1) Add capacitor Cn as
shown, close to the
sensor, for transient
suppression if required
2) Add resistor Rpu as
shown for sinking output
CUSTOMER OPTIONS - Switching Specifications
SPECIFICATIONS
Hall Type
Supply Voltage
(Note 1)
Absolute Ratings
Operate
Overvoltage Protection
Vdc
Vdc
Vdc-max
Output High Voltage
Vdc
Output Low Voltage
Vdc-max
Output Current (continuously on)
mA-max
Current Consumption over
Low
mA
Temperature Range
High
mA
Switching Speed
kHz-max
Operating
O_C
Temperature
Storage
O_C
Note 1 - As long as Tj (Junction Temperature) max. is not exceeded
Note 2 - Preprogrammed by Hamlin or Customer pending agreement
Digital Switch or Digital Latch
3 Wire
(Voltage output)
2 Wire
(Current Output)
-15 to +28
-15 to +28
+3.8 to +24
+3.75 to +24
32
32
sinking output
N/A
0.4 @ 20mA
N/A
10
N/A
1.6 - 5.2
5-6.9
1.6 - 5.2
12-17
10
10
-40 to +100
-40 to +100
-65 to +105
-65 to +105
A - Analogue
(Programmable Only) (Note 2)
8.5
4.5-5.5
19.5
4.65
0.35
-1.0 to +1.0
2 - 10
2 - 10
2
-40 to +100
-65 to +105
CUSTOMER OPTIONS - Sensitivity, Cable Length and Termination Specification
TABLE 1
HALL OPTIONS
ACTIVATE DISTANCES ARE APPROXIMATE
USING NEFEB MAGNET
(.827L X .276W X .185H) 21 X 7 X 4.7
HAMLIN P/N 5812334000
Select
Hall Option
2M
2H
2L
3M
3H
3L
AP
Hall
Type
2 Wire Switch
2 Wire Switch
2 Wire Latch
3 Wire Switch
3 Wire Switch
3 Wire Latch
Analogue
N Sd
Sensitivity
Gauss (Typ.)
120
57
40
130
59
86
Programmable
Activate - d
(in) mm
(.531) 13.5
(.728) 18.5
(.827) 21.0
(.492) 12.5
(.709) 18.0
(.394) 10.0
Consult Hamlin
TABLE 2
Cable Length:-
(Cable Type 24 AWG 7/32 PVC
105^oC UL1430/UL1569)
Standard Lengths
SELECT
OPTION
CABLE
LENGTH
(in) mm
01
(3.94) 100
02
(11.81) 300
03
(19.69) 500
04
(29.53) 750
05
(39.37) 1000
TABLE 3
Termination Options:-
SELECT
OPTION
DESCRIPTION (2 WIRE VERSION ILLUSTRATED)
A
Tinned leads
B
Crimped terminals
C
6.35mm fastons
D
AMP MTE 2.54mm pitch
E
JST XHP 2.5mm pitch
ORDERING INFORMATION
55100 XX
XX
X
Series 55100
Hall option
Cable Length
Termination
Table 1
Table 2
Table 3
Hamlin USA Tel: [phone] • Fax: [phone] • Email: [e-mail]
Hamlin UK
Tel: [phone] • Fax: [phone] • Email: [e-mail]
Hamlin Germany Tel: [phone] • Fax: [phone] • Email: [e-mail]
Hamectrol France Tel: [phone] • Fax: [phone] • Email: [e-mail]
Issue No: AE Date: 05/02/09 DCR B6092
INFORMATION PROVIDED ON THIS DATA SHEET IS PROVIDED FOR
INFORMATION PURPOSES ONLY AND SHOULD NOT BE RELIED UPON AS
BEING ACCURATE FOR ANY PARTICULAR PURPOSE. Product performance
may be affected by the application to which the product is put. Upon request,
HAMLIN will assist purchasers by providing information specific to any
particular application. HAMLIN disclaims any and all liability whatsoever for any
purchaser’s reliance upon the information contained on this data sheet without
further consultation with authorised representatives of HAMLIN.