55085 Datasheet, PDF (1/1 Pages) HAMLIN Position and Movement Sensor Solutions – Mini Vane Hall Effect Sensor Features and Benefits

www.hamlin.com
55085 Mini Vane Hall Effect Sensor Features and Benefits
Features
Benefits
Applications
• Sensor and magnet contained in a single
housing
• Sensor operates when ferrous vane
passes through slot
• 3 pin leadout integral to sensor
• Vibration 50g max. @ 50-2,000Hz
• Shock 150g max. @ 11ms ¹/² Sine
• EMC to DIN 40839 (Consult Hamlin)
• Reverse/Over Voltage Protection
• Built in temperature compensation
• High switching speed up to 10kHz
• Long life; up to 20 billion operations
• Unaffected by harsh environments
• Operates in static or dynamic magnetic
field
• Small package size
• Simple installation and adjustment
• Position and limit sensing
• Shaft rotation sensing
• Security systems
• Linear actuators
• Angle sensing
• Magnetic encoders
DIMENSIONS (in) mm
BLOCK DIAGRAM
CUSTOMER OPTIONS - SPECIFICATION
Hall Type
Supply Voltage
(Note 1)
Absolute Ratings
Recommended
Overvoltage Protection
Vdc
Vdc
Vdc-max
Output High Voltage
Vdc
Output Low Voltage
Vdc-max
Output Current (continuously on)
mA-max
Switching Speed
kHz-max
Operating
O_C
Temperature
Storage
O_C
Note 1 - As long as Tj (Junction Temperature) max. is not exceeded
CUSTOMER OPTIONS - ACTIVATION (in) mm
Notes
1) Add capacitor Cn as
shown, close to the
sensor, for transient
suppression if required
2) Add resistor Rpu as
shown for sinking output
Digital Switch
3 Wire (Voltage Output)
-15 to +28
+3.8 to +24
32
sinking output
0.4 @ 20mA
20
10
-40 to +100
-65 to +105
Activate Distance is approximate using a (.100)
2.54 thick ferrous vane as illustrated
(2.76) 7.00
ORDERING INFORMATION
Series 55085
55085 3M
Hamlin USA Tel: [phone] • Fax: [phone] • Email: [e-mail]
Hamlin UK
Tel: [phone] • Fax: [phone] • Email: [e-mail]
Hamlin Germany Tel: [phone] • Fax: [phone] • Email: [e-mail]
Hamectrol France Tel: [phone] • Fax: [phone] • Email: [e-mail]
Issue No: 3 Date: 24/03/03 DCR: B0063
OO
O
DETAILS PROVIDED ON THIS DATA SHEET ARE PROVIDED FOR
INFORMATION PURPOSES ONLY AND SHOULD NOT BE RELIED
UPON AS BEING ACCURATE FOR ANY PARTICULAR PURPOSE.
Product performance may be affected by the application to which the
product is put. Upon request, HAMLIN will assist purchasers by
providing information specific to any particular application. HAMLIN
disclaims any and all liability whatsoever for any purchaser’s reliance
upon the information contained on this data sheet without further
consultation with authorised representatives of HAMLIN.