55075-00-01-A Datasheet, PDF (1/1 Pages) HAMLIN Position and Movement Sensor Solutions – Geartooth Hall Effect Sensor Features and Benefits

www.hamlin.com
55075 Geartooth Hall Effect Sensor Features and Benefits
Features
• Rotary position geartooth sensor
• Stainless steel M12 threaded barrel
• Electronic protection against severe and
automotive environments
• Self adjusting magnetic range
• 3 wire (voltage output)
• EMC protection (consult Hamlin)
• Short circuit/reverse voltage protection
• Zero speed detection
Benefits
• Long life; up to 20 billion operations
• High speed operation
• No chopper delay
• Unaffected by harsh environments
• Rotary orientation not critical
• On-chip 10 bit A/D converter
• Customer selection of cable length and
connector type
Applications
• Geartooth sensor
• Camshaft sensor
• Linear encoder
• Rotary encoder
DIMENSIONS (in) mm
BLOCK DIAGRAM
SPECIFICATIONS
Hall Type
Supply
Voltage
(Note 1)
Maximum
Operation
Overvoltage Protection
Vdc
Vdc
Vdc-max
Output High Voltage
Vdc-min
Output Low Voltage
Vdc-max
Output Current (continuously on)
mA-max
Current Consumption
mA-min
mA-max
Switching Speed
kHz-max
Operating
O_C
Temperature
Storage
O_C
Note 1 - As long as Tj (Junction Temperature) is not exceeded
APPLICATION EXAMPLE - Geartooth Sensor
(.059") 1.5mm Typical
Typical Output
Digital Switch
3 Wire ( Voltage Output)
-25 to +25.2
4.75 to 25.2
27
VDD - 2 (sinking outputs with internal pull-up resistor)
0.6 @ 20mA
20
1
10.5
15
-40 to +85
-65 to +85
CUSTOMER OPTIONS - Cable Length and Termination
TABLE 1
Cable Length Options:-
(Cable Type 24 AWG
7/32 PVC 105^oC,
Double Insulated)
SELECT
OPTION
CABLE
LENGTH
(in) mm
01
(3.94) 100
TABLE 2
Termination Options:-
SELECT
OPTION
DESCRIPTION
A
Tinned leads
B
Crimped terminals
02
(11.81) 300
C
6.35mm fastons
03
(19.69) 500
04
(29.53) 750
D
AMP MTE 2.54mm pitch
05
(39.37) 1000
E
JST XHP 2.5mm pitch
ORDERING INFORMATION
55075 00
XX
Series 55075
Cable Length
Termination
Table 1
Table 2
Hamlin USA Tel: [phone] • Fax: [phone] • Email: [e-mail]
Hamlin UK
Tel: [phone] • Fax: [phone] • Email: [e-mail]
Hamlin Germany Tel: [phone] • Fax: [phone] • Email: [e-mail]
Hamectrol France Tel: [phone] • Fax: [phone] • Email: [e-mail]
Issue No: AF Date: 05.02.09 DCR B6092
X
INFORMATION PROVIDED ON THIS DATA SHEET IS PROVIDED FOR INFORMATION
PURPOSES ONLY AND SHOULD NOT BE RELIED UPON AS BEING ACCURATE FOR ANY
PARTICULAR PURPOSE. Product performance may be affected by the application to which the
product is put. Upon request, HAMLIN will assist purchasers by providing information specific
to any particular application. HAMLIN disclaims any and all liability whatsoever for any
purchaser’s reliance upon the information contained on this data sheet without further
consultation with authorised representatives of HAMLIN.