S9972-1007_15 Datasheet, PDF (9/10 Pages) Hamamatsu Corporation – CCD area image sensor

CCD area image sensor S9972/S9973 series
s Specifications of built-in temperature sensor
A chip thermistor is built in the same package with a CCD chip, and the CCD chip temperature can be monitored with it. A
relation between the thermistor resistance and absolute temperature is expressed by the following equation.
RT1 = RT2 × exp BT1/T2 (1/T1 - 1/T2)
1 MΩ
RT1: Resistance at absolute temperature T1 [K]
RT2: Resistance at absolute temperature T2 [K]
BT1/T2: B constant [K]
The characteristics of the thermistor used are as follows.
R298=10 kΩ
B298/323=3450 K
100 kΩ
10 kΩ
220
240
260
280
300
s Precaution for use (Electrostatic countermeasures)
Temperature (K)
KMPDB0111EB
q Handle these sensors with bare hands or wearing cotton gloves. In addition, wear anti-static clothing or use a wrist strap, in
order to prevent electrostatic damage due to electrical charges from friction.
q Avoid directly placing these sensors on a work-desk or work-bench that may carry an electrostatic charge.
q Provide ground lines or ground connection with the work-floor, work-desk and work-bench to allow static electricity to
discharge.
q Ground the tools used to handle these sensors, such as tweezers and soldering irons.
It is not always necessary to provide all the electrostatic measures stated above. Implement these measures according to the
amount of damage that occurs.
s Element cooling/heating temperature gradient rate
When using an external cooler, the element cooling/heating temperature gradient rate should be set at less than 5 K/min.
Multichannel detector head (C7020-02, C7021-02, C7025-02)
Features
l C7020-02: for S9972 series
C7021-02: for S9973-1007
C7025-02: for S9973-1008
l Area scanning or full line-binnng operation
l Readout frequency: 250 kHz
l Readout noise: 20 e-rms
l_TEC∆_TT_O=5_R0_H˚C_E (∆_DT₍c_Ch₇a₀n₂g₀e_,s_Cb₇y₀r₂ad₁i_,a_Ctio₇n₀₂m₅e₎thod.)
Input
Symbol
Value
Supply
voltage
VD1
VA1+
VA1-
VA2
VD2
Vp
VF
+5 Vdc, 200 mA
+15 Vdc, +100 mA
-15 Vdc, -100 mA
+24 Vdc, 30 mA
+5 Vdc, 30 mA (C7021-02, C7025-02)
+5 Vdc, 2.5 A (C7021-02, C7025-02)
+12 Vdc, 100 mA (C7021-02, C7025-02)
Master start
φms HCMOS logic compatible
Master clock φmc HCMOS logic compatible, 1 MHz
9