S11639 Datasheet, PDF (8/8 Pages) Hamamatsu Corporation – CMOS linear image sensor

CMOS linear image sensor
S11639
Precautions
(1) Electrostatic countermeasures
This device has a built-in protection circuit against static electrical charges. However, to prevent destroying the device with electro-
static charges, take countermeasures such as grounding yourself, the workbench and tools to prevent static discharges. Also protect
this device from surge voltages which might be caused by peripheral equipment.
(2) Light input window
If dust or dirt gets on the light input window, it will show up as black blemishes on the image. When cleaning, avoid rubbing the
window surface with dry cloth or dry cotton swab, since doing so may generate static electricity. Use soft cloth, paper or a cotton
swab moistened with alcohol to wipe dust and dirt off the window surface. Then blow compressed air onto the window surface so
that no spot or stain remains.
(3) Soldering
To prevent damaging the device during soldering, take precautions to prevent excessive soldering temperatures and times. Solder-
ing should be performed within 5 seconds at a soldering temperature below 260 °C.
(4) Operating and storage environments
Always observe the rated temperature range when handling the device. Operating or storing the device at an excessively high tem-
perature and humidity may cause variations in performance characteristics and must be avoided.
(5) UV exposure
This device is designed to suppress performance deterioration due to UV exposure. Even so, avoid unnecessary UV exposure to the
device. Also, be careful not to allow UV light to strike the cemented portion of the glass.
Related information
www.hamamatsu.com/sp/ssd/doc_en.html
Precautions
∙ Notice
∙ Image sensors/Precautions
Information described in this material is current as of November, 2013.
Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the
information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always
contact us for the delivery specification sheet to check the latest specifications.
Type numbers of products listed in the delivery specification sheets or supplied as samples may have a suffix "(X)" which means preliminary specifications or
a suffix "(Z)" which means developmental specifications.
The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that
one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product
use.
Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission.
www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: [phone], Fax: [phone]
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: [phone], Fax: [phone]
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: [phone], Fax: [phone]
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: [phone], Fax: [phone]
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: [phone], Fax: [phone]
North Europe: Hamamatsu Photonics Norden AB: Thorshamnsgatan 35 16440 Kista, Sweden, Telephone: [phone], Fax: [phone]
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1 int. 6, 20020 Arese, (Milano), Italy, Telephone: [phone], Fax: [phone]
China: Hamamatsu Photonics (China) Co., Ltd.: 1201 Tower B, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: [phone], Fax: [phone]
8
Cat. No. KMPD1136E04 Nov. 2013 DN