C7942CA Datasheet, PDF (8/8 Pages) Hamamatsu Corporation – Flat panel sensor

Digital frame grabber cable for IMAQ PCI-1424 A8406-02/-03/-04/-05
A8406-02/-03/-04/-05 cable for IMAQ PCI-1424 frame grabber
A8406-02/-03/-04/-05 cable is designed to connect the Flat Panel Sensor (C7942CA or C7943CA) to the National Instrument IMAQ
PCI-1424 (NI parts No. 777662-01) digital frame grabber board. Both ends of this cable have connectors. One end is a 36-pin plug
mating with the C7942CA or C7943CA digital output receptacle, while the other end is a 100-pin plug for the IMAQ PCI-1424.
s Pin connection for A8406-02
TX20A-36PH1-D2P1-D1
Pin No.
Signal
PCS-XE100MA TX20A-36PH1-D2P1-D1
Pin No.
Pin No.
Signal
PCS-XE100MA
Pin No.
1
Data1+ (MSB)
23
19
Data1- (MSB)
24
2
Data2+
21
20
Data2-
22
3
Data3+
19
21
Data3-
20
4
Data4+
17
22
Data4-
18
5
Data5+
15
23
Data5-
16
6
Data6+
13
24
Data6-
14
7
Data7+
11
25
Data7-
12
8
Data8+
9
26
Data8-
10
9
Data9+
7
27
Data9-
8
10
Data10+
5
28
Data10-
6
11
Data11+
3
29
Data11-
4
12
Data12+ (LSB)
1
30
Data12- (LSB)
2
13
bin0 (TTL)
33
31
Gnd
99
14
bin1 (TTL)
35
32
Gnd
100
15
ExtTrg (TTL)
37
33
IntExt (TTL)
39
16
Vsync+
41
34
Vsync-
42
17
Hsync+
43
35
Hsync-
44
18
Pclk+
49
36
Pclk-
50
s Dimensional outline (unit: mm)
PCS-XE100MA
a
18 36
51
1
1 19
TX20A-36PH1-D2P1-D1
36-PIN CABLE
PCS-XEM100LU2
100
50
Cable type No.
a
A8406-02 5000 ± 140
A8406-03 7000 ± 140
A8406-04 10000 ± 140
A8406-05 12000 ± 140
KACCA0097EB
Notice) · Do not subject the Flat Panel Sensors to strong vibration or shock. (Strong shock such as drop impacts may cause
permanent damage to these sensors.)
· Users must take responsibility for implementing X-ray shielding safety measures to avoid the risk of X-ray exposure.
· This product was not designed and manufactured for use as a medical X-ray device. System manufacturers must take
responsibility for obtaining MHW or FDA approval when incorporating this product into a medical diagnostics system.
· This product is warranted for a period of 12 months after the date of the shipment.
The warranty is limited to make a replacement or repair of any defective material due to defects in workmanship or
materials used in manufacture. It does not cover loss or damage of the product due to natural calamity, misuse or total
radiation dose over 1 million Roentgen (80 kV) even within the warranty period.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2003 Hamamatsu Photonics K.K.
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Hamamatsu City, 435-8558 Japan, Telephone: [phone], Fax: [phone], http://www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: [phone], Fax: [phone]
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: [phone], Fax: [phone]
France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: [phone], Fax: [phone]
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: [phone], Fax: [phone]
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: [phone], Fax: [phone]
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: [phone], Fax: [phone]
Cat. No. KACC1056E12
8
Sep. 2003 DN