C8061-01_15 Datasheet, PDF (7/12 Pages) Hamamatsu Corporation – Designed for InGaAs linear image sensor

InGaAs multichannel detector head
C8061-01, C8062-01
Pin assignment of “signal I/O” connector
15-pin D-sub connector
8 7 6 5 4 3 21
15 14 13 12 11 10 9
KACCC0069EA
Pin no.
1
Terminal name
Cf SEL
Description
Digital input signal used to select conversion gain of charge amplifier in InGaAs image sensor.
HCMOS compatible
High level or left open: Low gain (0.3 V/pC)
Low level: High gain (6 V/pC)
2
Data video*⁵
Analog video output
Positive polarity (Typ. 10 V)
3
VA1+ (+15 V) Analog power supply
4
VA1- (-15 V) Analog power supply
5
VD1 (+5 V) Digital power supply
6
Start
Digital input signal for initializing the circuit
HCMOS compatible. Positive logic
Digital input signal for operating the circuit
7
CLK
HCMOS compatible
Rising edge operati^Ko^An^CCC0069EA
Digital output signal for indicating end-of-scan of the image sensor
8
EOS
HCMOS compatible
Negative logic
9
A.GND
Analog ground
10
A.GND
Analog ground
11
NC
No Connection
12
D.GND
Digital ground
13
D.GND
Digital ground
14
D.GND
Digital ground
Digital output signal for A/D conversion
15
Trigger
HCMOS compatible
Positive logic
*5: Depending on the individual sensor to install, some channels might have a dark output lower than ground potential so use a bipolar
A/D converter.
7